How to remove and install latch, as well as the process for removing and replacing the hood release cable on 1997 through 2001 Toyota Avalon?

For latch removal, start by scribing a line around the latch for alignment reference, then remove the plastic cover secured by plastic pins. Take out the retaining bolts holding the hood latch to the radiator support and remove the latch. Disconnect the hood cable from the latch assembly. When installing, follow the reverse process of removal.For cable removal, disconnect the hood cable from the latch assembly and attach thin wire or string to the cable's end. Unclip all remaining cable retaining clips at the radiator support. Remove the plastic inner fender well, driver's side door sill cover, and kick panel. Detach the hood release lever by removing the two mounting bolts. To install, pull the cable and grommet into the passenger compartment until the wire or string is visible. Ensure the new cable has a grommet attached, then transfer the wire or string to the new cable. Pull the wire or string back through the firewall until the new cable reaches the latch assembly. Reinstall the new cable into the hood release lever in the passenger compartment, making sure the cable housing fits the notch in the handle bracket. Complete the installation by following the reverse process of removal.

How to perform routine maintenance doors, hood, trunk or liftgate's locks and hinges to ensure smooth operation and prevent wear on 1997 through 2001 Toyota Avalon?

Routine maintenance involves applying a few drops of light oil or lock lubricant to the hinges and latch assemblies of doors, hood, and trunk (or liftgate) every 3000 miles or every three months. Additionally, lubricate the door latch strikers with a thin layer of grease for reduced wear and improved movement. Use spray-on graphite lubricant to maintain door and trunk (or liftgate) locks.

Genuine Toyota Avalon Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hood Latches found

View related parts
Toyota Avalon Lock Assembly, Hood
Part Number: 53510-AC010
$55.09 MSRP: $76.99
You Save: $21.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCX10L-AEPGKA, MCX10L-AEPNKA, MCX10L-AEPNKK, MCX10L-AESGKA, MCX10L-AESNKA, MCX10L-AESNKK, MCX20L-AEPNKA, MCX20L-AEPNKK, MCX20L-AESNKA
View related parts
Toyota Avalon Lock Assembly, Hood
Part Number: 53510-AC040
$54.25 MSRP: $75.82
You Save: $21.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Avalon | XLS | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCX20L-AEPGKA, MCX20L-AEPGKK, MCX20L-AESGKA
View related parts
Toyota Avalon Lock Assembly, Hood
Part Number: 53510-AC050
$55.09 MSRP: $76.99
You Save: $21.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2011 Toyota Avalon | XL | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSX30L-AEANKA, GSX30L-AETNKA
View related parts
Toyota Avalon Lock Assembly, Hood
Part Number: 53510-07010
$69.02 MSRP: $97.29
You Save: $28.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Lock, Lock Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2012 Toyota Avalon | Limited, XL, XLS | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSX30L-AETGKA, GSX30L-AETNKA, GSX30L-AETPKA
View related parts
Toyota Avalon Lock Assembly, Hood
Part Number: 53510-07020
$62.88 MSRP: $88.64
You Save: $25.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota Avalon | Limited, XLE, XLE Premium, XLE Touring Or Touring | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFXE, 2GRFE; 2ARFXE, 2GRFE; AVX40L-AEXGBA, AVX40L-AEXPBA, GSX40L-AETGKA, GSX40L-AETPKA, GSX40L-AETQKA
View related parts
Toyota Avalon Lock Assy, Hood
Part Number: 53510-07030
$63.12 MSRP: $88.97
You Save: $25.85 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Limited, Touring, XLE, XSE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2GRFKS, A25AFKS, A25AFXS; 2GRFKS, A25AFKS, A25AFXS; AXXA55L-AEZGBA, AXXA55L-AEZPBA, AXXH50L-AEXGBA, AXXH50L-AEXPBA, AXXH50L-AEXQBA, AXXH51L-AEXGBA, AXXH51L-AEXPBA, AXXH51L-AEXQBA, GSX50L-AEZGBA, GSX50L-AEZPBA, GSX50L-AEZQBA, GSX50L-AEZSBA
View related parts
Toyota Avalon Lock Assembly, Hood
Part Number: 53510-AC060
$74.68 MSRP: $105.28
You Save: $30.60 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2011 Toyota Avalon | Limited, XL, XLS | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSX30L-AEAGKA, GSX30L-AEANKA, GSX30L-AEAPKA, GSX30L-AETGKA, GSX30L-AETNKA, GSX30L-AETPKA
View related parts
Toyota Avalon Lock Assembly, Hood
Part Number: 53510-AC020
Product Specifications
- Other Name: Lock Assy, Hood; Lock
- Manufacturer Note: W(ANTI-THEFT DEVICE)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1999 Toyota Avalon | XL, XLS | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCX10L-AEPGKA, MCX10L-AEPGKK, MCX10L-AEPNKA, MCX10L-AESGKA, MCX10L-AESGKK, MCX10L-AESNKA

Toyota Avalon Hood Latch

Hood Latch in Toyota Avalon automobiles ensures that the hood is closed and would not open in the course of the operation of the automobile. This component is placed under the front part of the hood such that components such as the engine, radiator and battery are protected. The types and designs of the Hood Latch do not differ according to the type or model of Avalon, but the basic system plays the same role of securing the hood area. The Hood Latch is among the significant parts of an automobile as far as safety and protection of the crucial components are concerned and hence, emphasizes the aspect of designs used in the Toyota Avalon.

If you are in demand for superior quality and affordable OEM Toyota Avalon Hood Latch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Avalon Hood Latch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Avalon Hood Latch Parts Questions & Experts Answers

Lock Assembly, Hood
53510-AC040
Q: How to remove and install latch, as well as the process for removing and replacing the hood release cable on 1997 through 2001 Toyota Avalon?
A: For latch removal, start by scribing a line around the latch for alignment reference, then remove the plastic cover secured by plastic pins. Take out the retaining bolts holding the hood latch to the radiator support and remove the latch. Disconnect the hood cable from the latch assembly. When installing, follow the reverse process of removal.For cable removal, disconnect the hood cable from the latch assembly and attach thin wire or string to the cable's end. Unclip all remaining cable retaining clips at the radiator support. Remove the plastic inner fender well, driver's side door sill cover, and kick panel. Detach the hood release lever by removing the two mounting bolts. To install, pull the cable and grommet into the passenger compartment until the wire or string is visible. Ensure the new cable has a grommet attached, then transfer the wire or string to the new cable. Pull the wire or string back through the firewall until the new cable reaches the latch assembly. Reinstall the new cable into the hood release lever in the passenger compartment, making sure the cable housing fits the notch in the handle bracket. Complete the installation by following the reverse process of removal.
Lock Assembly, Hood
53510-AC010
Q: How to perform routine maintenance doors, hood, trunk or liftgate's locks and hinges to ensure smooth operation and prevent wear on 1997 through 2001 Toyota Avalon?
A: Routine maintenance involves applying a few drops of light oil or lock lubricant to the hinges and latch assemblies of doors, Hood, and trunk (or liftgate) every 3000 miles or every three months. Additionally, lubricate the door latch strikers with a thin layer of grease for reduced wear and improved movement. Use spray-on graphite lubricant to maintain door and trunk (or liftgate) locks.