How to remove and install a hood latch and cable on Toyota Camry?

On all models except Avalon, remove the front bumper assembly; on Avalon models, remove the radiator grille. Scribe a line around the latch to aid alignment when installing, then remove the plastic cover over the latch retained by plastic pins. Remove the retaining bolts securing the hood latch to the radiator support. To adjust the hood latch horizontally or vertically, loosen these bolts. Remove the latch. Disconnect the hood cable by disengaging the cable from the latch assembly. Pry out the cable retainer from the backside of the hood latch assembly, then disengage the cable. Installation is the reverse of removal. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed. Raise the vehicle, support it securely on jackstands and remove the front wheel. Remove the lower opening extension pad from the bottom of the fender. Remove the inner fender liner. Disconnect the hood cable from the latch assembly. Pry out the cable retainer from the backside of the hood latch assembly, then disengage the cable. Attach a piece of thin wire or string to the end of the cable and unclip all remaining cable retaining clips at the radiator support fender and firewall. Working in the passenger compartment remove the driver's side door sill cover and kick panel. Remove the driver's knee bolster panel. The hood latch release lever is attached to the panel. Remove the knee bolster and detach the cable end from the release lever assembly. Pull the cable and grommet rearward into the passenger compartment until you can see the wire or string. Ensure that the new cable has a grommet attached, then remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached to the wire or string, pull the wire or string back through the firewall until the new cable reaches the latch assembly. Working in the passenger compartment, reinstall the new cable into the hood release lever, making sure the cable housing fits snugly into the notch in the handle bracket. The remainder of the installation is the reverse of removal. Push on the grommet with your fingers from the passenger compartment to seat the grommet in the firewall correctly.

Genuine Toyota Camry Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Hood Latches found

View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-AC010
$55.09 MSRP: $76.99
You Save: $21.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1994-1996 Toyota Camry | DX, LE, SE, XLE | 4 Cyl 2.2L, 6 Cyl 3.0L | 1MZFE, 5SFE; 1MZFE, 5SFE; MCV10L-CCPNKA, MCV10L-CCPNKK, MCV10L-CCPSKA, MCV10L-CEPDKK, MCV10L-CEPGKA, MCV10L-CEPNKA, MCV10L-CEPNKK, MCV10L-CEPSKA, MCV10L-CWPNKA, MCV10L-CWPNKK, SXV10L-CCMDKA, SXV10L-CCMDKK, SXV10L-CCMNKK, SXV10L-CCPDKA, SXV10L-CCPDKK, SXV10L-CCPNKA, SXV10L-CCPNKK, SXV10L-CEMDKA, SXV10L-CEMDKK, SXV10L-CEMNKK, SXV10L-CEPDKA, SXV10L-CEPDKK, SXV10L-CEPGKA, SXV10L-CEPNKA, SXV10L-CEPNKK, SXV10L-CWMDKK, SXV10L-CWPDKA, SXV10L-CWPDKK, SXV10L-CWPNKA, SXV10L-CWPNKK
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06280
$43.70 MSRP: $61.08
You Save: $17.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2017 Toyota Camry | LE, N, SE, XLE, XSE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2ARFXE, 2GRFE; 2ARFE, 2ARFXE, 2GRFE; ASV50L-CETEKA, ASV50L-CETGKA, ASV50L-CETNKA, ASV50L-CETPKA, ASV50L-CETSKA, AVV50L-CEXGBA, AVV50L-CEXNBA, AVV50L-CEXSBA, GSV50L-CETSKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-33390
$69.61 MSRP: $98.12
You Save: $28.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Replaces: 53510-33311, 53510-33310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | XLE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2AZFE, 2GRFE; 2ARFE, 2AZFE, 2GRFE; ACV40L-AEAGKA, 2GRFE; ASV40L-AETGKA, ASV40L-AETGKA, GSV40L-AETGKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06200
$48.30 MSRP: $67.52
You Save: $19.22 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2015 Toyota Camry | LE, N, SE, XLE, XSE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2ARFXE, 2GRFE; 2ARFE, 2ARFXE, 2GRFE; ASV50L-CETEKA, ASV50L-CETGKA, ASV50L-CETNKA, ASV50L-CETPKA, ASV50L-CETSKA, AVV50L-CEXGBA, AVV50L-CEXNBA, AVV50L-CEXSBA, GSV50L-CETSKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06330
$62.47 MSRP: $88.06
You Save: $25.59 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch, Lock
- Manufacturer Note: MEXICO SPEC
- Replaces: 53510-33380
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2022 Toyota Camry | LE, No Grade, SE, XLE, XSE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2GRFKS, A25AFKS, A25AFXS; 2GRFKS, A25AFKS, A25AFKS; AXVA70L-AEZNBA, A25AFXS; AXVA70L-CEZEBA, AXVA70L-AEZSBA, AXVA70L-CEZGBA, AXVA70L-CEZNBA, AXVA70L-CEZPBA, AXVA70L-CEZSBA, AXVA75L-CEZGBA, AXVA75L-CEZNBA, AXVA75L-CEZPBA, AXVA75L-CEZSBA, AXVH70L-CEXGBA, AXVH70L-CEXNBA, AXVH70L-CEXPBA, AXVH70L-CEXSBA, AXVH71L-CEXGBA, AXVH71L-CEXSBA, GSV70L-CEZGBA, GSV70L-CEZPBA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-AA070
$59.46 MSRP: $83.81
You Save: $24.35 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | LE, SE | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 2AZFE, 3MZFE; 1MZFE, 2AZFE, 3MZFE; ACV30L-CEANKA, ACV30L-CEASKA, ACV30L-CEPNKA, ACV30L-CEPSKA, MCV30L-CEANKA, MCV30L-CEASKA, MCV30L-CEPNKA, MCV30L-CEPSKA, MCV31L-CEASKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06170
$68.85 MSRP: $97.06
You Save: $28.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: ANTI-THEFT SYSTEM-W(ALARM & IMMOBILIZER)
- Replaced by: 53510-06172
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | SE, XLE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2AZFE, 2GRFE; 2ARFE, 2AZFE, 2GRFE; ACV40L-CEAGKA, ACV40L-CEASKA, ACV40L-CEMSKA, ASV40L-CETGKA, GSV40L-CETGKA, GSV40L-CETSKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-AA010
$53.90 MSRP: $75.33
You Save: $21.43 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2L, 6 Cyl 3.0L | 1MZFE, 5SFE; 1MZFE, 5SFE; MCV20L-CEMDKA, MCV20L-CEMNKA, MCV20L-CEPDKK, MCV20L-CEPGKA, MCV20L-CEPGKK, MCV20L-CEPNKA, MCV20L-CEPNKK, SXV20L-CEMDKA, SXV20L-CEMDKK, SXV20L-CEMNKK, SXV20L-CEPDKA, SXV20L-CEPDKK, SXV20L-CEPGKA, SXV20L-CEPNKA, SXV20L-CEPNKK
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06172
$68.85 MSRP: $97.06
You Save: $28.21 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Replaces: 53510-06170, 53510-06171
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | SE, XLE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2AZFE, 2GRFE; 2ARFE, 2AZFE, 2GRFE; ACV40L-CEAGKA, 2GRFE; ASV40L-CETGKA, ACV40L-CEASKA, ACV40L-CEMSKA, ASV40L-CETGKA, GSV40L-CETGKA, GSV40L-CETSKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06190
$69.02 MSRP: $97.29
You Save: $28.27 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2015 Toyota Camry | LE, SE, XLE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2ARFXE, 2GRFE; 2ARFE, 2ARFXE, 2GRFE; ASV50L-CETGKA, ASV50L-CETNKA, ASV50L-CETSKA, AVV50L-CEXGBA, AVV50L-CEXSBA, GSV50L-CETGKA, GSV50L-CETSKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-33310
$69.61 MSRP: $98.12
You Save: $28.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Replaced by: 53510-33390
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | XLE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2AZFE, 2GRFE; 2ARFE, 2AZFE, 2GRFE; ACV40L-AEAGKA, ASV40L-AETGKA, GSV40L-AETGKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06180
$48.53 MSRP: $67.84
You Save: $19.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | LE, SE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2AZFE, 2AZFXE, 2GRFE; 2ARFE, 2AZFE, 2AZFXE, 2GRFE; ACV40L-CEANKA, ACV40L-CEASKA, ACV40L-CEMNKA, ACV40L-CEMSKA, AHV40L-CEXGBA, ASV40L-CEFNKA, ASV40L-CEFSKA, ASV40L-CETNKA, ASV40L-CETSKA, GSV40L-CETNKA, GSV40L-CETSKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-33211
$79.28 MSRP: $111.76
You Save: $32.48 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | XLE | 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE; 1MZFE, 2AZFE; ACV30L-AEAGKA, ACV30L-AEPGKA, ACV30L-CEPGKA, MCV30L-AEAGKA, MCV30L-AEPGKA, MCV30L-CEPGKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06430
$44.14 MSRP: $61.70
You Save: $17.56 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2021 Toyota Camry | No Grade | 4 Cyl 2.5L | A25AFKS; A25AFKS; AXVA70L-CEZEBA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06290
$68.43 MSRP: $96.46
You Save: $28.03 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2017 Toyota Camry | LE, SE, XLE, XSE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2ARFXE, 2GRFE; 2ARFE, 2ARFXE, 2GRFE; ASV50L-CETGKA, ASV50L-CETNKA, ASV50L-CETPKA, ASV50L-CETSKA, AVV50L-CEXGBA, AVV50L-CEXNBA, AVV50L-CEXSBA, GSV50L-CETGKA, GSV50L-CETSKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-33380
$62.47 MSRP: $88.06
You Save: $25.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Replaced by: 53510-06330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2019 Toyota Camry | LE, SE | 4 Cyl 2.5L | A25AFKS; A25AFKS; AXVA70L-AEZNBA, AXVA70L-AEZSBA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-33270
$49.02 MSRP: $68.52
You Save: $19.50 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | LE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2AZFE, 2AZFXE, 2GRFE; 2ARFE, 2AZFE, 2AZFXE, 2GRFE; ACV40L-AEANKA, ACV40L-AEMNKA, AHV40L-AEXGBA, ASV40L-AETNKA, GSV40L-AETNKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-33201
$55.09 MSRP: $76.99
You Save: $21.90 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | LE, SE | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 2AZFE, 3MZFE; 1MZFE, 2AZFE, 3MZFE; ACV30L-AEANKA, ACV30L-AEASKA, ACV30L-AEMNKA, ACV30L-AEMSKA, ACV30L-AEPNKA, ACV30L-AEPSKA, ACV30L-CEPNKA, ACV30L-CEPSKA, MCV30L-AEANKA, MCV30L-AEASKA, MCV30L-AEPNKA, MCV30L-AEPSKA, MCV30L-CEPNKA, MCV30L-CEPSKA, MCV31L-AEASKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-06171
$68.85 MSRP: $97.06
You Save: $28.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Replaced by: 53510-06172
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Camry | XLE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2GRFE; 2ARFE, 2GRFE; ASV40L-CETGKA, GSV40L-CETGKA
View related parts
Toyota Camry Lock Assembly, Hood
Part Number: 53510-33311
$69.61 MSRP: $98.12
You Save: $28.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Replaced by: 53510-33390
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Camry | XLE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2GRFE; 2ARFE, 2GRFE; ASV40L-AETGKA, GSV40L-AETGKA

| Page 1 of 2 |Next >

1-20 of 27 Results

Toyota Camry Hood Latch

If you are in demand for superior quality and affordable OEM Toyota Camry Hood Latch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Camry Hood Latch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Camry Hood Latch Parts Questions & Experts Answers

Lock Assembly, Hood
53510-06172
Q: How to remove and install a hood latch and cable on Toyota Camry?
A: On all models except Avalon, remove the front Bumper assembly; on Avalon models, remove the radiator grille. Scribe a line around the latch to aid alignment when installing, then remove the plastic cover over the latch retained by plastic pins. Remove the retaining bolts securing the hood latch to the radiator support. To adjust the hood latch horizontally or vertically, loosen these bolts. Remove the latch. Disconnect the hood cable by disengaging the cable from the latch assembly. Pry out the cable retainer from the backside of the hood latch assembly, then disengage the cable. Installation is the reverse of removal. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed. Raise the vehicle, support it securely on jackstands and remove the front wheel. Remove the lower opening extension pad from the bottom of the fender. Remove the inner fender liner. Disconnect the hood cable from the latch assembly. Pry out the cable retainer from the backside of the hood latch assembly, then disengage the cable. Attach a piece of thin wire or string to the end of the cable and unclip all remaining cable retaining clips at the radiator support fender and firewall. Working in the passenger compartment remove the driver's side door sill cover and kick panel. Remove the driver's knee bolster panel. The hood latch release lever is attached to the panel. Remove the knee bolster and detach the cable end from the release lever assembly. Pull the cable and grommet rearward into the passenger compartment until you can see the wire or string. Ensure that the new cable has a grommet attached, then remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached to the wire or string, pull the wire or string back through the firewall until the new cable reaches the latch assembly. Working in the passenger compartment, reinstall the new cable into the hood release lever, making sure the cable housing fits snugly into the notch in the handle bracket. The remainder of the installation is the reverse of removal. Push on the grommet with your fingers from the passenger compartment to seat the grommet in the firewall correctly.