How do you remove the front stabilizer bar and bushing on Toyota Camry?

To remove the sway bar kit, loosen the lug nuts on the front wheels, raise the vehicle, and remove the wheels and fender apron seals. Disconnect the tie-rod ends and sway bar kit links. Remove the bushing retainers from the sub frame and exhaust pipe. Lift the steering gear assembly to remove the kit. Check the retainer Sway Bar Bushing and sway bar kit link for damage. Clean and lubricate the new bushings. Reverse the process to install.

How to remove and install a rear stabilizer bar and bushing on Toyota Camry?

Loosen the lug nuts on the rear wheels. Raise the rear of the vehicle and securely place it on jackstands. Remove the rear wheels. Remove the heat insulator from the exhaust system. Disconnect the sway bar kit links from the bar. To detach the sway bar kit link from the bar, remove the lower nut; if you're removing the strut, remove the upper nut. If the ball stud turns with the nut, use an Allen wrench to hold the stud. Unbolt the sway bar bushing retainers and the two brackets from the body. Remove the bushing retainer bolts and brackets from both the left and right retainers. On Camry Solar a convertible models, there is a floor reinforcement sub assembly of braces that must be removed to allow sway bar kit removal. The sway bar kit can now be removed from the vehicle. Pull the retainers off the sway bar kit using a rocking motion. Check the bushings for wear, hardness, distortion, cracking, and other signs of deterioration. Replace them if necessary. Check the sway bar kit links. Using a wire brush, clean the areas of the bar where the bushings ride. Installation is the reverse of the removal procedure. If necessary, use a light coat of vegetable oil to ease bushing and U-bracket installation. Do not use petroleum-based products or brake fluid, as these will damage the rubber. Installation is the reverse of removal. On Solar a convertible models, tighten the floor reinforcement brace bolts to 38 ft-lbs.

Genuine Toyota Camry Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

64 Sway Bar Bushings found

View related parts
Toyota Camry Bush, Stabilizer Link
Part Number: 90385-11021
$2.26 MSRP: $3.16
You Save: $0.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1983-1986 Toyota Camry | DLX | 4 Cyl 1.8L, 4 Cyl 2.0L | 1CTLC, 2CTLC; 1CTLC, 2CTLC; CV10L-UEMNXA, CV10L-UEPNXA, CV11L-UEPNXA
View related parts
Toyota Camry Bush, Front STABILIZER Bar
Part Number: 48815-06140
$11.10 MSRP: $15.52
You Save: $4.42 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1; Bushing, Stabilizer Bar Bushing
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2017 Toyota Camry | LE, N, SE, XLE, XSE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2ARFXE, 2AZFE, 2GRFE; 2ARFE, 2ARFXE, 2AZFE, 2GRFE; ACV40L-CEASKA, ACV40L-CEMSKA, ASV40L-CEFSKA, ASV40L-CETSKA, ASV50L-CETEKA, ASV50L-CETGKA, ASV50L-CETNKA, ASV50L-CETPKA, ASV50L-CETSKA, AVV50L-CEXSBA, GSV40L-CETSKA, GSV50L-CETGKA, GSV50L-CETSKA
View related parts
Toyota Camry Bush, Front STABILIZER Bar
Part Number: 48815-06090
$9.66 MSRP: $13.50
You Save: $3.84 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1; Bushing, Stabilizer Bar Bushing
- Position: Front
- Replaces: 48815-33100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2017 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.5L | 1MZFE, 2ARFE, 2ARFXE, 2AZFE, 2AZFXE, 2GRFE, 3MZFE; 1MZFE, 2ARFE, 2ARFXE, 2AZFE, 2AZFXE, 2GRFE, 3MZFE; ACV30L-AEASKA, 3MZFE; ACV30L-CEAGKA, ACV30L-AEMSKA, ACV30L-AEPSKA, ACV30L-CEANKA, ACV30L-CEASKA, ACV30L-CEPGKA, ACV30L-CEPNKA, ACV30L-CEPSKA, ACV40L-AEAGKA, ACV40L-AEANKA, ACV40L-AEMNKA, ACV40L-CEAGKA, ACV40L-CEANKA, ACV40L-CEMNKA, AHV40L-AEXGBA, AHV40L-CEXGBA, ASV40L-AETGKA, ASV40L-AETNKA, ASV40L-CEFNKA, ASV40L-CETGKA, ASV40L-CETNKA, AVV50L-CEXGBA, AVV50L-CEXNBA, AVV50L-CEXSBA, GSV40L-AETGKA, GSV40L-AETNKA, GSV40L-CETGKA, GSV40L-CETNKA, MCV30L-AEAGKA, MCV30L-AEANKA, MCV30L-AEASKA, MCV30L-AEPGKA, MCV30L-AEPNKA, MCV30L-AEPSKA, MCV30L-CEAGKA, MCV30L-CEANKA, MCV30L-CEASKA, MCV30L-CEPGKA, MCV30L-CEPNKA, MCV30L-CEPSKA, MCV31L-AEASKA, MCV31L-CEASKA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-12170
$12.95 MSRP: $18.10
You Save: $5.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Manufacturer Note: CANADA SPEC
- Position: Rear
- Replaces: 48818-06190, 48818-20110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2AZFE, 2GRFE; 2ARFE, 2AZFE, 2GRFE; ACV40L-AEAGKA, 2GRFE; ACV40L-CEAGKA, ACV40L-AEANKA, ACV40L-AEMNKA, ACV40L-CEAGKA, ACV40L-CEANKA, ACV40L-CEASKA, ACV40L-CEMNKA, ACV40L-CEMSKA, ASV40L-AETGKA, ASV40L-AETNKA, ASV40L-CEFNKA, ASV40L-CEFSKA, ASV40L-CETGKA, ASV40L-CETNKA, ASV40L-CETSKA, GSV40L-AETGKA, GSV40L-AETNKA, GSV40L-CETGKA, GSV40L-CETNKA, GSV40L-CETSKA
- 1987-1991 Toyota Camry | DX, LE | 4 Cyl 2.0L | 3SFE; 3SFE; SV25L-UEMDKA, SV25L-UEMDKK, SV25L-UEMNKA, SV25L-UEMNKK, SV25L-UEPDKA, SV25L-UEPDKK, SV25L-UEPNKA, SV25L-UEPNKK
View related parts
Toyota Camry Bush, STABILIZER
Part Number: 48815-06080
$10.12 MSRP: $14.14
You Save: $4.02 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1; Bushing, Stabilizer Bar Bushing
- Manufacturer Note: OD=23
- Comment: (FOR REAR)
- Replaces: 48815-33090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | LE, XLE | 4 Cyl 2.4L | 2AZFE; 2AZFE; ACV30L-AEAGKA, 2AZFE; ACV30L-CEAGKA, ACV30L-AEANKA, ACV30L-AEMNKA, ACV30L-AEPGKA, ACV30L-AEPNKA, ACV30L-CEANKA, ACV30L-CEPGKA, ACV30L-CEPNKA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-06150
$7.04 MSRP: $9.86
You Save: $2.82 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | LE, XLE | 4 Cyl 2.4L | 2AZFE; 2AZFE; ACV30L-CEAGKA, ACV30L-CEANKA, ACV30L-CEPGKA, ACV30L-CEPNKA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-06300
$10.90 MSRP: $15.23
You Save: $4.33 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Camry | LE, N, SE, XLE, XSE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2ARFXE, 2GRFE; 2ARFE, 2ARFXE, 2GRFE; ASV50L-CETEKA, ASV50L-CETGKA, ASV50L-CETNKA, ASV50L-CETPKA, ASV50L-CETSKA, AVV50L-CEXSBA, GSV50L-CETGKA, GSV50L-CETSKA
View related parts
Toyota Camry Bush, Front STABILIZER Bar
Part Number: 48815-33100
$9.66 MSRP: $13.50
You Save: $3.84 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1
- Position: Front
- Replaced by: 48815-06090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2011 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.5L | 1MZFE, 2ARFE, 2AZFE, 2AZFXE, 2GRFE, 3MZFE; 1MZFE, 2ARFE, 2AZFE, 2AZFXE, 2GRFE, 3MZFE; ACV30L-AEASKA, ACV30L-AEMSKA, ACV30L-AEPSKA, ACV40L-AEAGKA, ACV40L-AEANKA, ACV40L-AEMNKA, AHV40L-AEXGBA, ASV40L-AETGKA, ASV40L-AETNKA, GSV40L-AETGKA, GSV40L-AETNKA, MCV30L-AEAGKA, MCV30L-AEANKA, MCV30L-AEASKA, MCV30L-AEPGKA, MCV30L-AEPNKA, MCV30L-AEPSKA, MCV31L-AEASKA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-07010
$17.74 MSRP: $24.80
You Save: $7.06 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2001 Toyota Camry | LE, XLE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-CEMNKA, MCV20L-CEPGKA, MCV20L-CEPNKA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-48020
$7.94 MSRP: $11.09
You Save: $3.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaced by: 48818-48021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | LE, XLE | 4 Cyl 2.4L | 2AZFE; 2AZFE; ACV30L-AEAGKA, ACV30L-AEANKA, ACV30L-AEMNKA, ACV30L-AEPGKA, ACV30L-AEPNKA
View related parts
Toyota Camry Bush, Front STABILIZER Bar
Part Number: 48815-33090
$10.12 MSRP: $14.14
You Save: $4.02 (29%)
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1
- Position: Front
- Replaced by: 48815-06080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | LE, XLE | 4 Cyl 2.4L | 2AZFE; 2AZFE; ACV30L-AEAGKA, ACV30L-AEANKA, ACV30L-AEMNKA, ACV30L-AEPGKA, ACV30L-AEPNKA
View related parts
Toyota Camry Bush, Front STABILIZER Bar
Part Number: 48815-06050
$12.26 MSRP: $17.12
You Save: $4.86 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1
- Position: Front
- Replaced by: 48815-33050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2L, 6 Cyl 3.0L | 1MZFE, 5SFE; 1MZFE, 5SFE; MCV20L-CEMDKA, MCV20L-CEMNKA, MCV20L-CEPDKK, MCV20L-CEPGKA, MCV20L-CEPGKK, MCV20L-CEPNKA, MCV20L-CEPNKK, SXV20L-CEMDKA, SXV20L-CEMDKK, SXV20L-CEMNKK, SXV20L-CEPDKA, SXV20L-CEPDKK, SXV20L-CEPGKA, SXV20L-CEPNKA, SXV20L-CEPNKK
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-06190
$12.95 MSRP: $18.10
You Save: $5.15 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Position: Rear
- Replaced by: 48818-12170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2008 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4L, 6 Cyl 3.5L | 2AZFE, 2GRFE; 2AZFE, 2GRFE; ACV40L-CEAGKA, ACV40L-CEANKA, ACV40L-CEASKA, ACV40L-CEMNKA, ACV40L-CEMSKA, GSV40L-CETGKA, GSV40L-CETNKA, GSV40L-CETSKA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-33050
$13.71 MSRP: $19.16
You Save: $5.45 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaced by: 48818-06090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2L, 6 Cyl 3.0L | 1MZFE, 5SFE, 5SFNE; 1MZFE, 5SFE, 5SFNE; MCV20L-AEPDKK, MCV20L-AEPGKA, MCV20L-AEPGKK, MCV20L-AEPNKA, SXV20L-AEPDKK, SXV20L-AEPGKA, SXV20L-AEPNKA, SXV20L-AEPNKK, SXV23L-AEPNCA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-AA010
$8.56 MSRP: $11.95
You Save: $3.39 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Camry | SE | 4 Cyl 2.4L, 6 Cyl 3.3L | 2AZFE, 3MZFE; 2AZFE, 3MZFE; ACV30L-CEASKA, ACV30L-CEPSKA, MCV31L-CEASKA
View related parts
Toyota Camry Bush, STABILIZER
Part Number: 48815-06260
$23.09 MSRP: $32.27
You Save: $9.18 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2022 Toyota Camry | LE, SE, XLE, XSE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2GRFKS, A25AFKS, A25AFXS; 2GRFKS, A25AFKS, A25AFXS; AXVA70L-CEZPBA, AXVA70L-CEZSBA, AXVA75L-CEZGBA, AXVA75L-CEZNBA, AXVA75L-CEZPBA, AXVA75L-CEZSBA, AXVH70L-CEXGBA, AXVH70L-CEXNBA, AXVH70L-CEXPBA, AXVH70L-CEXSBA, AXVH71L-CEXGBA, AXVH71L-CEXSBA, GSV70L-CEZPBA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-06090
$13.71 MSRP: $19.16
You Save: $5.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Position: Rear
- Replaces: 48818-0T010, 48818-33050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2L, 6 Cyl 3.0L | 1MZFE, 5SFE, 5SFNE; 1MZFE, 5SFE, 5SFE; MCV20L-CEMDKA, 5SFNE; MCV20L-AEPDKK, MCV20L-AEPGKA, MCV20L-AEPGKK, MCV20L-AEPNKA, MCV20L-CEMNKA, MCV20L-CEPDKK, MCV20L-CEPGKA, MCV20L-CEPGKK, MCV20L-CEPNKA, MCV20L-CEPNKK, SXV20L-AEPDKK, SXV20L-AEPGKA, SXV20L-AEPNKA, SXV20L-AEPNKK, SXV20L-CEMDKA, SXV20L-CEMDKK, SXV20L-CEMNKK, SXV20L-CEPDKA, SXV20L-CEPDKK, SXV20L-CEPGKA, SXV20L-CEPNKA, SXV20L-CEPNKK, SXV23L-AEPNCA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-33031
$23.06 MSRP: $32.24
You Save: $9.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Manufacturer Note: SPORTS PACKAGE
- Position: Rear
- Replaces: 48818-33030, 48818-06041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1996 Toyota Camry | DX, LE, SE, XLE | 4 Cyl 2.2L, 6 Cyl 3.0L | 1MZFE, 3VZFE, 5SFE; 1MZFE, 3VZFE, 3VZFE; VCV10L-AEMNKK, 5SFE; MCV10L-AEPNKK, 5SFE; MCV10L-CCPNKK, MCV10L-AEPSKA, MCV10L-CCPSKA, MCV10L-CEPNKK, MCV10L-CEPSKA, SXV10L-AEMDKA, SXV10L-AEPDKA, SXV10L-AEPGKA, SXV10L-AEPNKA, SXV10L-CCMDKA, SXV10L-CCMDKK, SXV10L-CCMNKK, SXV10L-CCPDKA, SXV10L-CCPDKK, SXV10L-CCPNKA, SXV10L-CCPNKK, SXV10L-CEMDKA, SXV10L-CEMDKK, SXV10L-CEMNKK, SXV10L-CEPDKA, SXV10L-CEPDKK, SXV10L-CEPGKA, SXV10L-CEPNKA, SXV10L-CEPNKK, VCV10L-AEMNKK, VCV10L-AEMSKA, VCV10L-AEPNKK, VCV10L-AEPSKA, VCV10L-CEMSKA, VCV10L-CEPSKA
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-33021
$23.06 MSRP: $32.24
You Save: $9.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Position: Rear
- Replaces: 48818-33020, 48818-06031, 48818-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1996 Toyota Camry | DX, LE, XLE | 4 Cyl 2.2L, 6 Cyl 3.0L | 1MZFE, 3VZFE, 5SFE; 1MZFE, 3VZFE, 5SFE; MCV10L-CWPNKA, 5SFE; SXV10L-AEMDKA, 5SFE; SXV10L-CEMDKA, MCV10L-CWPNKK, SXV10L-AEMDKK, SXV10L-AEMNKK, SXV10L-AEPDKA, SXV10L-AEPDKK, SXV10L-AEPGKA, SXV10L-AEPNKA, SXV10L-AEPNKK, SXV10L-CCMDKA, SXV10L-CCMDKK, SXV10L-CCPDKA, SXV10L-CCPDKK, SXV10L-CCPNKA, SXV10L-CCPNKK, SXV10L-CEMDKA, SXV10L-CEMDKK, SXV10L-CEPDKA, SXV10L-CEPDKK, SXV10L-CEPGKA, SXV10L-CEPNKA, SXV10L-CEPNKK, SXV10L-CWMDKK, SXV10L-CWPDKA, SXV10L-CWPDKK, SXV10L-CWPNKA, SXV10L-CWPNKK, VCV10L-CWPNKA, VCV10L-CWPNKK
View related parts
Toyota Camry Bush, Stabilizer, Rear
Part Number: 48818-06160
$8.48 MSRP: $11.87
You Save: $3.39 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Manufacturer Note: MEXICO SPEC
- Position: Rear
- Replaces: 48818-21030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 2AZFE, 3MZFE; 1MZFE, 2AZFE, 3MZFE; ACV30L-AEASKA, 3MZFE; ACV30L-CEAGKA, ACV30L-AEMSKA, ACV30L-AEPSKA, ACV30L-CEANKA, ACV30L-CEASKA, ACV30L-CEPGKA, ACV30L-CEPNKA, ACV30L-CEPSKA, MCV30L-AEAGKA, MCV30L-AEANKA, MCV30L-AEASKA, MCV30L-AEPGKA, MCV30L-AEPNKA, MCV30L-AEPSKA, MCV30L-CEAGKA, MCV30L-CEANKA, MCV30L-CEASKA, MCV30L-CEPGKA, MCV30L-CEPNKA, MCV30L-CEPSKA, MCV31L-AEASKA, MCV31L-CEASKA

| Page 1 of 4 |Next >

1-20 of 64 Results

Toyota Camry Sway Bar Bushing

The Sway Bar Bushing in Toyota Camry specifically ensures the steadiness and maneuverability of the automobile through providing a firm hold of the sway bar. Once the bushings get worn out they affect the sway bar's stability and thus reduce the safety and the ease to maneuver. It has been established that various Sway Bar Bushing have been installed in different generational models of Camry and each of this Sway Bar Bushing may have different designs and functions to fit the Camry in the right manner for efficiency and safety while on the road. This means that from time to time, it is important to inspect and or replace the Sway Bar Bushing to have a comfortable and safe drive in the Toyota Camry.

If you are in demand for superior quality and affordable OEM Toyota Camry Sway Bar Bushing, then shop with us! We own a wide range of the reduced-priced genuine Toyota Camry Sway Bar Bushing. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Camry Sway Bar Bushing Parts Questions & Experts Answers

Bush, Front STABILIZER Bar
48815-33100
Q: How do you remove the front stabilizer bar and bushing on Toyota Camry?
A: To remove the sway bar kit, loosen the lug nuts on the front wheels, raise the vehicle, and remove the wheels and fender apron seals. Disconnect the tie-rod ends and sway bar kit links. Remove the bushing retainers from the sub frame and exhaust pipe. Lift the steering gear assembly to remove the kit. Check the retainer Sway Bar Bushing and sway bar kit link for damage. Clean and lubricate the new bushings. Reverse the process to install.
Bush, Stabilizer, Rear
48818-06300
Q: How to remove and install a rear stabilizer bar and bushing on Toyota Camry?
A: Loosen the lug nuts on the rear wheels. Raise the rear of the vehicle and securely place it on jackstands. Remove the rear wheels. Remove the heat insulator from the exhaust system. Disconnect the sway bar kit links from the bar. To detach the sway bar kit link from the bar, remove the lower nut; if you're removing the strut, remove the upper nut. If the ball stud turns with the nut, use an Allen wrench to hold the stud. Unbolt the sway bar bushing retainers and the two brackets from the body. Remove the bushing retainer bolts and brackets from both the left and right retainers. On Camry Solar a convertible models, there is a floor reinforcement sub assembly of braces that must be removed to allow sway bar kit removal. The sway bar kit can now be removed from the vehicle. Pull the retainers off the sway bar kit using a rocking motion. Check the bushings for wear, hardness, distortion, cracking, and other signs of deterioration. Replace them if necessary. Check the sway bar kit links. Using a wire brush, clean the areas of the bar where the bushings ride. Installation is the reverse of the removal procedure. If necessary, use a light coat of vegetable oil to ease bushing and U-bracket installation. Do not use petroleum-based products or brake fluid, as these will damage the rubber. Installation is the reverse of removal. On Solar a convertible models, tighten the floor reinforcement brace bolts to 38 ft-lbs.

Related Toyota Camry Parts

Browse by Year