×
- Live Chat
- 1-888-905-9199
My Garage
My Account
Cart
Genuine Toyota Echo Air Bag Control Module
SRS Airbag Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Air Bag Control Modules found
Toyota Echo Sensor Assembly, Air Bag
Part Number: 89170-0W110$586.91 MSRP: $742.07You Save: $155.16 (21%)Ships in 1-3 Business DaysToyota Echo Sensor Assembly, Air Bag
Part Number: 89170-0W150$645.74 MSRP: $816.46You Save: $170.72 (21%)Ships in 1-3 Business Days
Toyota Echo Air Bag Control Module
If you are in demand for superior quality and affordable OEM Toyota Echo Air Bag Control Module, then shop with us! We own a wide range of the reduced-priced genuine Toyota Echo Air Bag Control Module. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Echo Air Bag Control Module Parts Questions & Experts Answers
- Q: How to remove and refit the airbag,Air Bag Sensor and Air Bag Control Module on Toyota Echo?A: To remove the driver's airbag, first deactivate the airbag system, then remove the two Torx screws located at the back of the steering wheel centre pad, which may be tight. Carefully pull away the back section of the wheel boss to release the airbag unit, then disconnect the wiring plug by pressing and sliding back the locking catch and prising up the yellow section before disconnecting the main body. Store the airbag safely. For refitting, ensure the battery remains disconnected while reconnecting the airbag wiring, securely reconnect the wiring plug, and tighten the Torx screws. For the passenger's airbag, deactivate the airbag system, remove the upper facia panel, and then the two retaining nuts before prising up the clips to release the unit. During refitting, keep the battery disconnected, ensure the wiring harness is routed correctly, and tighten the mounting nuts. To remove the airbag clockspring, first take out the driver's airbag unit, then the steering wheel and column shrouds. Disconnect the airbag wiring plug and horn connector, secure the clockspring in its centred position with tape, and release the clips to withdraw the unit without turning it. Refitting involves centralising the clockspring before attaching the steering wheel. Side airbags should not be removed; any issues should be addressed by a dealer. For the airbag control unit, deactivate the airbag system, remove the trim panel, disconnect the wiring plugs, and unscrew the securing bolts. During refitting, ensure the battery is disconnected, reconnect the wiring securely, and tighten the bolts to the specified torque. Front impact sensors are located under the bonnet; deactivate the airbag system, remove the air cleaner if necessary, disconnect the wiring plug, and unscrew the mounting bolts. For side impact sensors, located in the 8-pillars and possibly inside the door on 3-door models, deactivate the airbag system, remove the appropriate trim panel, disconnect the wiring plug, and unscrew the mounting bolts. Refitting for both types of sensors requires the battery to be disconnected, secure reconnection of wiring, and tightening of the mounting bolts to the specified torque.
