How do you remove and refit the bonnet release cable on Toyota Echo?

If the cable has broken, determine which end has failed; if the break is inside the car, it may be possible to remove the release lever and operate the remains of the cable to open the hood. If the break is under the hood, it can be opened through the radiator grille aperture or from underneath. Even with the hood shut, the lock may be operable through the grille with minimal damage, though access to the cable will be limited. From underneath, with the car jacked up and supported on axle stands, access to the hood lock operating lever may be improved. The hood cable lever is located on the lower facia panel, to the right of the steering wheel. Pull out the release lever, unclip the cable end fitting from underneath it, release the outer cable from the mounting bracket, and withdraw it under the facia. Under the hood, prise out the outer cable end fitting from its slot in the hood lock, then unhook the inner cable from the lock operating lever. Release the cable from the clips and brackets in the engine compartment, noting its routing. Tie a length of string to the end of the cable at the release lever inside the car, then carefully pull the cable through the bulkhead grommet into the engine compartment. Untie the string from the end of the cable and leave it in position to aid refitting. Refitting is a reversal of removal; tie the string to the release lever end of the cable and use it to pull the cable into position, ensuring that the cable is routed as noted before removal and that the bulkhead grommet is correctly seated.

Genuine Toyota Echo Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Cables found

View related parts
Toyota Echo Cable Assy, Hood Lock Control
Part Number: 53630-52090
$38.38 MSRP: $53.64
You Save: $15.26 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2005 Toyota Echo | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK, NCP13L-AGMRKK, NCP13L-AGPRKK, NCP13L-AHMRKK, NCP13L-AHPRKK
View related parts
Toyota Echo Cable Assy, Hood Lock Control
Part Number: 53630-52010
$39.02 MSRP: $54.53
You Save: $15.51 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Replaces: 53630-0D011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Echo | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK
View related parts
Toyota Echo Lever Sub-Assy, Hood Lock Control
Part Number: 53601-52010-B0
$44.90 MSRP: $62.75
You Save: $17.85 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: BLUE GRAY,TRIM1#
- Replaced by: 53601-52010-B7
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Echo | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK
View related parts
Toyota Echo Lever Sub-Assy, Hood Lock Control
Part Number: 53601-52010-B6
$41.17 MSRP: $57.55
You Save: $16.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Handle, Release Switch
- Replaces: 53601-05030-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2005 Toyota Echo | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK, NCP13L-AGMRKK, NCP13L-AGPRKK, NCP13L-AHMRKK, NCP13L-AHPRKK
View related parts
Toyota Echo Lever Sub-Assy, Hood Lock Control
Part Number: 53601-52010-B1
$41.79 MSRP: $58.41
You Save: $16.62 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: MD.CHARCOAL,TRIM9#
- Replaced by: 53601-52010-C1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Echo | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK
View related parts
Toyota Echo Lever Sub-Assy, Hood Lock Control
Part Number: 53601-52010-E0
$41.79 MSRP: $58.41
You Save: $16.62 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: FAWN,TRIM4#
- Replaced by: 53601-52010-C1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2005 Toyota Echo | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK

Toyota Echo Hood Cable

If you are in demand for superior quality and affordable OEM Toyota Echo Hood Cable, then shop with us! We own a wide range of the reduced-priced genuine Toyota Echo Hood Cable. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Echo Hood Cable Parts Questions & Experts Answers

Cable Assy, Hood Lock Control
53630-52010
Q: How do you remove and refit the bonnet release cable on Toyota Echo?
A: If the cable has broken, determine which end has failed; if the break is inside the car, it may be possible to remove the release lever and operate the remains of the cable to open the hood. If the break is under the hood, it can be opened through the radiator grille aperture or from underneath. Even with the hood shut, the lock may be operable through the grille with minimal damage, though access to the cable will be limited. From underneath, with the car jacked up and supported on axle stands, access to the hood lock operating lever may be improved. The hood cable lever is located on the lower facia panel, to the right of the steering wheel. Pull out the release lever, unclip the cable end fitting from underneath it, release the outer cable from the mounting bracket, and withdraw it under the facia. Under the hood, prise out the outer cable end fitting from its slot in the hood lock, then unhook the inner cable from the lock operating lever. Release the cable from the clips and brackets in the engine compartment, noting its routing. Tie a length of string to the end of the cable at the release lever inside the car, then carefully pull the cable through the bulkhead grommet into the engine compartment. Untie the string from the end of the cable and leave it in position to aid refitting. Refitting is a reversal of removal; tie the string to the release lever end of the cable and use it to pull the cable into position, ensuring that the cable is routed as noted before removal and that the bulkhead grommet is correctly seated.