How to inspect and replace the Drag Link,Pitman Arm and Tie Rod End on Toyota Land Cruiser?

Steering linkage couples the steering gear to the front wheels so that the two wheels will be parallel to each other. It accommodates the Pitman arm that is connected to the steering gear shaft and moves the drag link to transfer motion to the steering knuckle through a tube, clamps and two tie-rod ends. There is also a steering damper included to reduce shimmy and any other unwanted forces. To check, center and align the position of the wheels, as well as lock the steering wheel, and then using a jack raise the car to lift one side of it and affix a dial indicator on the edge of the wheel. B shake the wheel a bit and ensure that the gauge reading is less than 6.0 mm; if the latter is more feel for loose linkage. Lift the car on jackstands to look for troubled parts. Before removing the tie-rod end you will need to follow the loosening of the wheel lug nuts, lifting of the vehicle and the removing of the wheel. Untighten the castle nut on the ballstud without taking it of, then using the ballstud puller, pull off the ballstud off the steering knuckle. If a tie-rod end has to be replaced, the number of threads that are visible should be noted in order to reform the part, lubricate the new part, and then screw it back to the original number. Replace the new tie-rod end into position and make sure it is firmly fixed then tighten the nut. Fit new cotter pins and tight the clamp nuts. After reconstruction is complete, raise the car and take off the tires, then ins Affiliate tighten the bolts, and check the front end alignment. For drag link removal, you need to lift the vehicle so you can then remove the steering damper for you to disconnect the two ends of drag link from the Pitman arm as well as the steering knuckle. If replacements are required it's the same process as identifying the thread count. Reinstallation is done in the reverse sequence, with all the fasteners being tighten at the end. Regarding the Pitman arm on the truck, the first step is to free the drag link by unthreading the nut on it and then using a removal tool to free it and also align the marks before replacing the part. Last, disconnect the steering damper from the center link, remove it from the frame bracket, and regain it and fix the bolts and nuts with right strength.

Genuine Toyota Land Cruiser Drag Link

Center Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Drag Links found

View related parts
Toyota Land Cruiser End Sub-Assy, Steering Relay Rod, RH
Part Number: 45044-69125
$64.30 MSRP: $90.64
You Save: $26.34 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Center Link, End, Inner Tie Rod, Relay Rod
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1997 Toyota Land Cruiser | 6 Cyl 4.0L, 8 Cyl 4.5L | 1FZFE, 3FE; 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser Steering Rack End Sub-Assembly
Part Number: 45503-69015
$208.63 MSRP: $299.16
You Save: $90.53 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Steering Rack; Inner Tie Rod, Tie Rod Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2003 Toyota Land Cruiser | 8 Cyl 4.7L | 2UZFE; 2UZFE; UZJ100L-GNAEKA, UZJ100L-GNPEKA
View related parts
Toyota Land Cruiser Steering Rack End Sub-Assembly
Part Number: 45503-60030
$233.10 MSRP: $334.24
You Save: $101.14 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Steering Rack; Inner Tie Rod
- Replaced by: 45503-60050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2021 Toyota Land Cruiser | 8 Cyl 5.7L | 3URFE; 3URFE; URJ200L-GNTEKA, URJ200L-GNZVKA
View related parts
Toyota Land Cruiser Rod Assy, Steering Relay
Part Number: 45450-69145
$376.28 MSRP: $553.87
You Save: $177.59 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Center Link, Relay Rod
- Replaces: 45450-69125
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1997 Toyota Land Cruiser | 6 Cyl 4.0L, 8 Cyl 4.5L | 1FZFE, 3FE; 1FZFE, 1FZFE; FZJ80L-GNPEKA, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser Rod, Steering Relay
Part Number: 45451-60120
$129.67 MSRP: $184.35
You Save: $54.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjust Tube, Rod
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1997 Toyota Land Cruiser | 6 Cyl 4.0L, 8 Cyl 4.5L | 1FZFE, 3FE; 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser End Sub-Assy, Steering Relay Rod, RH
Part Number: 45045-69035
$18.94 MSRP: $26.76
You Save: $7.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1981-1984 Toyota Land Cruiser | 6 Cyl 3.4L, 6 Cyl 4.2L | 2F, 3B; 2F, 3B; BJ60LG-KK, BJ60LG-MK, FJ60LG-KA
View related parts
Toyota Land Cruiser End Sub-Assy, Steering Relay Rod, LH
Part Number: 45045-69046
$105.13 MSRP: $148.19
You Save: $43.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Steering Relay Rod, RH
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1990 Toyota Land Cruiser | 6 Cyl 4.0L | 3FE; 3FE; FJ62LG-PNEA, FJ62LG-PNEK
View related parts
Toyota Land Cruiser Rod Assy, Tie, RH
Part Number: 45460-69155
$324.21 MSRP: $464.88
You Save: $140.67 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Center Link, Tie Rod Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1997 Toyota Land Cruiser | 6 Cyl 4.0L, 8 Cyl 4.5L | 1FZFE, 3FE; 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser End Sub-Assy, Steering Relay Rod, RH
Part Number: 45045-69045
$83.65 MSRP: $117.91
You Save: $34.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Replaced by: 45045-60H04
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1983-1990 Toyota Land Cruiser | 6 Cyl 3.4L, 6 Cyl 4.0L, 6 Cyl 4.2L | 2F, 2H, 3B, 3FE; 2F, 2H, 3B, 3FE; BJ60LG-MK, BJ70LV-MNK, BJ70LV-MRK, FJ60LG-KA, FJ60LV-KA, FJ62LG-PNEA, FJ62LG-PNEK, FJ62LV-PNEA, HJ60LG-MK
View related parts
Toyota Land Cruiser Rod, Steering Relay
Part Number: 45451-60100
$122.65 MSRP: $174.38
You Save: $51.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1987 Toyota Land Cruiser | 6 Cyl 3.4L | 3B; 3B; BJ70LV-MNK, BJ70LV-MRK
View related parts
Toyota Land Cruiser Steering Rack End Sub-Assembly
Part Number: 45503-69025
$224.10 MSRP: $321.34
You Save: $97.24 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Steering Rack; Inner Tie Rod
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2007 Toyota Land Cruiser | 8 Cyl 4.7L | 2UZFE; 2UZFE; UZJ100L-GNAEKA, UZJ100L-GNPEKA
View related parts
Toyota Land Cruiser Rod Assy, Steering Relay
Part Number: 45450-69035
$263.80 MSRP: $378.26
You Save: $114.46 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 45450-69055
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1981-1984 Toyota Land Cruiser | 6 Cyl 3.4L, 6 Cyl 4.2L | 2F, 3B; 2F, 3B; BJ60LG-KK, BJ60LG-MK, FJ60LG-KA
View related parts
Toyota Land Cruiser End Sub-Assy, Steering Relay Rod, RH
Part Number: 45045-60013
$69.02 MSRP: $97.30
You Save: $28.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Replaced by: 45045-60H00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1969-1970 Toyota Land Cruiser | 6 Cyl 3.9L | F; F; FJ40L-A, FJ40LV-A, FJ55LG-
View related parts
Toyota Land Cruiser Link Assy, Steering Drag
Part Number: 45440-60032
$117.87 MSRP: $167.56
You Save: $49.69 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 45440-69025
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1969-1970 Toyota Land Cruiser | 6 Cyl 3.9L | F; F; FJ55LG-
View related parts
Toyota Land Cruiser Rod Assy, Steering Relay
Part Number: 45450-69125
$376.28 MSRP: $553.87
You Save: $177.59 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 45450-69145
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1996 Toyota Land Cruiser | 6 Cyl 4.0L, 8 Cyl 4.5L | 1FZFE, 3FE; 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser End Sub-Assy, Steering Relay Rod, RH
Part Number: 45045-69015
$69.02 MSRP: $97.30
You Save: $28.28 (30%)
Product Specifications
- Manufacturer Note: ISO
- Position: Passenger Side
- Replaced by: 45045-60H00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1969-1984 Toyota Land Cruiser | 6 Cyl 3.0L, 6 Cyl 3.4L, 6 Cyl 3.9L, 6 Cyl 4.2L | 2F, 3B, B, F; 2F, 3B, B, F; BJ40LV-KCJK, BJ42LV-KCJK, BJ42LV-MCJK, FJ40L-A, FJ40L-KJA, FJ40L-KJK, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ40LV-KCJK, FJ45LP-KK, FJ55LG-, FJ55LG-KA, FJ55LG-KK
View related parts
Toyota Land Cruiser Link, Steering Drag
Part Number: 45441-60010
Product Specifications
- Other Name: Center Link
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1969-1984 Toyota Land Cruiser | 6 Cyl 3.0L, 6 Cyl 3.4L, 6 Cyl 3.9L, 6 Cyl 4.2L | 2F, 3B, B, F; 2F, 3B, B, F; BJ40LV-KCJK, BJ42LV-KCJK, BJ42LV-MCJK, FJ40L-A, FJ40L-KJA, FJ40L-KJK, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ40LV-KCJK, FJ45LP-KK
View related parts
Toyota Land Cruiser Rod Assy, Steering Relay
Part Number: 45450-60021
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1981-1984 Toyota Land Cruiser | 6 Cyl 3.4L, 6 Cyl 4.2L | 2F, 3B; 2F, 3B; BJ42LV-KCJK, BJ42LV-MCJK, FJ40L-KJA, FJ40LV-KCJA, FJ40LV-KCJK
View related parts
Toyota Land Cruiser Rod Assembly, Steering Relay
Part Number: 45450-69085
Product Specifications
- Other Name: Rod Assy, Steering Relay
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1987 Toyota Land Cruiser | 6 Cyl 3.4L | 3B; 3B; BJ70LV-MNK, BJ70LV-MRK
View related parts
Toyota Land Cruiser Rod, Steering Relay
Part Number: 45451-60020
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1969-1975 Toyota Land Cruiser | 6 Cyl 3.9L, 6 Cyl 4.2L | 2F, F; 2F, F; FJ40L-A, FJ40L-KJA, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA

| Page 1 of 2 |Next >

1-20 of 27 Results

Toyota Land Cruiser Drag Link

If you are in demand for superior quality and affordable OEM Toyota Land Cruiser Drag Link, then shop with us! We own a wide range of the reduced-priced genuine Toyota Land Cruiser Drag Link. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Land Cruiser Drag Link Parts Questions & Experts Answers

Rod, Steering Relay
45451-60120
Q: How to inspect and replace the Drag Link,Pitman Arm and Tie Rod End on Toyota Land Cruiser?
A: Steering linkage couples the steering gear to the front wheels so that the two wheels will be parallel to each other. It accommodates the Pitman arm that is connected to the steering gear shaft and moves the drag link to transfer motion to the Steering Knuckle through a tube, clamps and two tie-rod ends. There is also a steering damper included to reduce shimmy and any other unwanted forces. To check, center and align the position of the wheels, as well as lock the steering wheel, and then using a jack raise the car to lift one side of it and affix a dial indicator on the edge of the wheel. B shake the wheel a bit and ensure that the gauge reading is less than 6.0 mm; if the latter is more feel for loose linkage. Lift the car on jackstands to look for troubled parts. Before removing the tie-rod end you will need to follow the loosening of the wheel lug nuts, lifting of the vehicle and the removing of the wheel. Untighten the castle nut on the ballstud without taking it of, then using the ballstud puller, pull off the ballstud off the steering knuckle. If a tie-rod end has to be replaced, the number of threads that are visible should be noted in order to reform the part, lubricate the new part, and then screw it back to the original number. Replace the new tie-rod end into position and make sure it is firmly fixed then tighten the nut. Fit new cotter pins and tight the clamp nuts. After reconstruction is complete, raise the car and take off the tires, then ins Affiliate tighten the bolts, and check the front end alignment. For drag link removal, you need to lift the vehicle so you can then remove the steering damper for you to disconnect the two ends of drag link from the Pitman arm as well as the steering knuckle. If replacements are required it's the same process as identifying the thread count. Reinstallation is done in the reverse sequence, with all the fasteners being tighten at the end. Regarding the Pitman arm on the truck, the first step is to free the drag link by unthreading the nut on it and then using a removal tool to free it and also align the marks before replacing the part. Last, disconnect the steering damper from the center link, remove it from the frame bracket, and regain it and fix the bolts and nuts with right strength.