How to remove, inspect, and install the Clutch Disc and Pressure Plate on Toyota Land Cruiser?

The location of the clutch components is usually reached with the transmission off the vehicle but the engine still in place; however, if the engine is going to be pulled for extensive overhaul, it would not be a bad idea to inspect clutch wear and replace questionable parts. Start by pulling out the clutch release cylinder followed by the removal of the transmission, with the engine in place, this may require an engine-lift or a jack and a piece of wood to sit the engine on. By inserting a clutch alignment tool through the disc hub, the dropping of the clutch disc can be stopped while removing it. Check the flywheel and pressure plate for the index marks, and if not present, then make some on them that will be useful for correct alignment when the time comes to put them back on the engine. Turn the bolts holding pressure plate to fly wheel gradually in a cross wise manner until all spring pressure is released, then remove the bolts, the pressure plate and clutch disc. While inspecting, also look for cracks specifically on the flywheel as they can hinder the overall function of the piece; although if mistakes are present, a machine shop can help to polish over them. Check the pilot bearing and the lining on the clutch disc being careful to see that lining is 1/32-inch above the rivet heads and no sign of damage. Some of the other parts that reside along with the clutch disc include the clutch release bearing and the pressure plate, according to their condition, these should also be changed. To install the clutch, clean the flywheel and the pressure plate carefully using a rubbing-alcohol dampened rag to remove any oil or grease, and then, correctly orient the clutch disc and pressure plate by using the alignment tool. Hydrilate the pressure plate to flywheel bolt finger tight, align the clutch disc and then uniformly tighten the bolts in star like fashion to the torque limit. Lastly, apply grease on the inner race of the clutch release bearing and the fork fingers after which the bearing is to be fitted , then the transmission and clutch release cylinder which should then be tighten after following the recommended torque quantam.

Genuine Toyota Land Cruiser Pressure Plate

Clutch Pressure Plate

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Pressure Plates found

View related parts
Toyota Land Cruiser Cover Assembly, Clutch
Part Number: 31210-60041
$233.13 MSRP: $334.29
You Save: $101.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-36330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1981-1982 Toyota Land Cruiser | 6 Cyl 4.2L | 2F; 2F; FJ40L-KJA, FJ40LV-KCJA, FJ40LV-KCJK, FJ60LG-KA
View related parts
Toyota Land Cruiser Plate, Clutch Pressure
Part Number: 31221-69025
$126.23 MSRP: $181.32
You Save: $55.09 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31221-60020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1976-1987 Toyota Land Cruiser | 6 Cyl 4.0L, 6 Cyl 4.2L | 2F, 2H; 2F, 2H; FJ40L-KJA, FJ40L-KJK, FJ40LV-KCJA, FJ40LV-KCJK, FJ45LP-KK, FJ55LG-KA, FJ55LG-KK, FJ60LG-KA, FJ60LV-KA, HJ60LG-MK
View related parts
Toyota Land Cruiser Cover Assembly, Clutch
Part Number: 31210-60070
$233.13 MSRP: $334.29
You Save: $101.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-36330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1987 Toyota Land Cruiser | 6 Cyl 4.0L, 6 Cyl 4.2L | 2F, 2H; 2F, 2H; FJ60LG-KA, FJ60LV-KA, HJ60LG-MK
View related parts
Toyota Land Cruiser Cover Assembly, Clutch
Part Number: 31210-60020
$139.24 MSRP: $197.95
You Save: $58.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Manufacturer Note: HEAVY DUTY SPRING
- Replaced by: 31210-60022
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1972-1974 Toyota Land Cruiser | 6 Cyl 3.9L | F; F; FJ40L-A, FJ40LV-A, FJ40LV-AC, FJ55LG-
View related parts
Toyota Land Cruiser Cover Sub-Assy, Clutch
Part Number: 31201-69026
$233.13 MSRP: $334.29
You Save: $101.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31210-36330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1981-1982 Toyota Land Cruiser | 6 Cyl 4.2L | 2F; 2F; FJ40L-KJA, FJ40LV-KCJA, FJ40LV-KCJK, FJ60LG-KA
View related parts
Toyota Land Cruiser Cover Sub-Assy, Clutch
Part Number: 31201-69027
$233.13 MSRP: $334.29
You Save: $101.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31210-36330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1981-1985 Toyota Land Cruiser | 6 Cyl 4.2L | 2F; 2F; FJ40L-KJA, FJ40LV-KCJA, FJ40LV-KCJK, FJ60LG-KA
View related parts
Toyota Land Cruiser Cover Assembly, Clutch
Part Number: 31210-60030
$233.13 MSRP: $334.29
You Save: $101.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-36330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1974-1977 Toyota Land Cruiser | 6 Cyl 3.9L, 6 Cyl 4.2L | 2F, F; 2F, F; FJ40L-A, FJ40L-KJA, FJ40L-KJK, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ40LV-KCJK, FJ55LG-, FJ55LG-KA, FJ55LG-KK
View related parts
Toyota Land Cruiser Cover Assembly, Clutch
Part Number: 31210-60040
$233.13 MSRP: $334.29
You Save: $101.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-36330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1976-1980 Toyota Land Cruiser | 6 Cyl 4.2L | 2F; 2F; FJ40L-KJA, FJ40L-KJK, FJ40LV-KCJA, FJ40LV-KCJK, FJ45LP-KK, FJ55LG-KA, FJ55LG-KK
View related parts
Toyota Land Cruiser Cover Assembly, Clutch
Part Number: 31210-60042
$233.13 MSRP: $334.29
You Save: $101.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-36330
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1981-1985 Toyota Land Cruiser | 6 Cyl 4.2L | 2F; 2F; FJ40L-KJA, FJ40LV-KCJA, FJ40LV-KCJK, FJ60LG-KA
View related parts
Toyota Land Cruiser Cover Assy, Clutch
Part Number: 31210-60021
$139.24 MSRP: $197.95
You Save: $58.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: HEAVY DUTY SPRING
- Replaced by: 31210-60022
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1973-1975 Toyota Land Cruiser | 6 Cyl 3.9L | F; F; FJ40L-A, FJ40LV-A, FJ40LV-AC, FJ55LG-
View related parts
Toyota Land Cruiser Cover Assembly, Clutch
Part Number: 31210-60011
$170.20 MSRP: $241.97
You Save: $71.77 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-60013
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1973-1975 Toyota Land Cruiser | 6 Cyl 3.9L | F; F; FJ40L-A, FJ40LV-A, FJ40LV-AC, FJ55LG-
View related parts
Toyota Land Cruiser Cover Sub-Assembly, Clutch
Part Number: 31201-69015
Product Specifications
- Other Name: Cover Sub-Assy, Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1974-1977 Toyota Land Cruiser | 6 Cyl 3.9L, 6 Cyl 4.2L | 2F, F; 2F, F; FJ40L-A, FJ40L-KJA, FJ40L-KJK, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ40LV-KCJK, FJ55LG-, FJ55LG-KA, FJ55LG-KK
View related parts
Toyota Land Cruiser Cover Sub-Assembly, Clutch
Part Number: 31201-69025
Product Specifications
- Other Name: Cover Sub-Assy, Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1976-1980 Toyota Land Cruiser | 6 Cyl 4.2L | 2F; 2F; FJ40L-KJA, FJ40L-KJK, FJ40LV-KCJA, FJ40LV-KCJK, FJ45LP-KK, FJ55LG-KA, FJ55LG-KK
View related parts
Toyota Land Cruiser Cover Assembly, Clutch
Part Number: 31210-36100
Product Specifications
- Other Name: Cover Assy, Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1987 Toyota Land Cruiser | 6 Cyl 3.4L | 3B; 3B; BJ70LV-MNK, BJ70LV-MRK
View related parts
Toyota Land Cruiser Plate, Clutch Pressure
Part Number: 31221-69015
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1974-1977 Toyota Land Cruiser | 6 Cyl 3.9L, 6 Cyl 4.2L | 2F, F; 2F, F; FJ40L-A, FJ40L-KJA, FJ40L-KJK, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ40LV-KCJK, FJ55LG-, FJ55LG-KA, FJ55LG-KK
View related parts
Toyota Land Cruiser Cover Sub-Assy, Clutch
Part Number: 31211-55011
Product Specifications
- Replaces: 31211-55010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1969-1975 Toyota Land Cruiser | 6 Cyl 3.9L | F; F; FJ40L-A, FJ40LV-A, FJ40LV-AC, FJ55LG-
View related parts
Toyota Land Cruiser Plate, Clutch Pressure
Part Number: 31221-55010
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1969-1975 Toyota Land Cruiser | 6 Cyl 3.9L | F; F; FJ40L-A, FJ40LV-A, FJ40LV-AC, FJ55LG-
View related parts
Toyota Land Cruiser Cover Assembly, Clutch
Part Number: 31210-60010
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-60013
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1969-1974 Toyota Land Cruiser | 6 Cyl 3.9L | F; F; FJ40L-A, FJ40LV-A, FJ40LV-AC, FJ55LG-

Toyota Land Cruiser Pressure Plate

If you are in demand for superior quality and affordable OEM Toyota Land Cruiser Pressure Plate, then shop with us! We own a wide range of the reduced-priced genuine Toyota Land Cruiser Pressure Plate. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Land Cruiser Pressure Plate Parts Questions & Experts Answers

Cover Assembly, Clutch
31210-60041
Q: How to remove, inspect, and install the Clutch Disc and Pressure Plate on Toyota Land Cruiser?
A: The location of the clutch components is usually reached with the transmission off the vehicle but the engine still in place; however, if the engine is going to be pulled for extensive overhaul, it would not be a bad idea to inspect clutch wear and replace questionable parts. Start by pulling out the clutch release cylinder followed by the removal of the transmission, with the engine in place, this may require an engine-lift or a jack and a piece of wood to sit the engine on. By inserting a clutch alignment tool through the disc hub, the dropping of the clutch disc can be stopped while removing it. Check the flywheel and pressure plate for the index marks, and if not present, then make some on them that will be useful for correct alignment when the time comes to put them back on the engine. Turn the bolts holding pressure plate to fly wheel gradually in a cross wise manner until all spring pressure is released, then remove the bolts, the pressure plate and clutch disc. While inspecting, also look for cracks specifically on the flywheel as they can hinder the overall function of the piece; although if mistakes are present, a machine shop can help to polish over them. Check the Pilot Bearing and the lining on the clutch disc being careful to see that lining is 1/32-inch above the rivet heads and no sign of damage. Some of the other parts that reside along with the clutch disc include the clutch release bearing and the pressure plate, according to their condition, these should also be changed. To install the clutch, clean the flywheel and the pressure plate carefully using a rubbing-alcohol dampened rag to remove any oil or grease, and then, correctly orient the clutch disc and pressure plate by using the alignment tool. Hydrilate the pressure plate to flywheel bolt finger tight, align the clutch disc and then uniformly tighten the bolts in star like fashion to the torque limit. Lastly, apply grease on the inner race of the clutch release bearing and the fork fingers after which the bearing is to be fitted , then the transmission and clutch release cylinder which should then be tighten after following the recommended torque quantam.

Related Toyota Land Cruiser Parts

Browse by Year

1987 Pressure Plate 1986 Pressure Plate 1985 Pressure Plate 1984 Pressure Plate 1983 Pressure Plate 1982 Pressure Plate 1981 Pressure Plate 1980 Pressure Plate 1979 Pressure Plate 1978 Pressure Plate 1977 Pressure Plate 1976 Pressure Plate 1975 Pressure Plate 1974 Pressure Plate 1973 Pressure Plate 1972 Pressure Plate 1971 Pressure Plate 1970 Pressure Plate 1969 Pressure Plate