How to remove and replace the Parking Brake Shoe on Toyota Matrix?

Take off the rear brake discs and measure the thickness of the friction material on the shoes. Replace them if it has worn down to 1.0 mm or less. Inspect the drum section of the disc for heat-induced scores, grooves or cracks. Should any of these conditions exist or there be considerable wear to the drum, replace disc. Clean off the brake parts with brake system cleaner. Remove parking brake shoes and upper return springs. Remove lower return spring and adjuster assembly. Unlock front shoe hold-down clip and pin. Take off shoe from vehicle. Take off strut and spring assembly. Dissociate rear shoe from parking brake lever and take it out from its place of installation. Apply light coat of high-temperature brake grease to backing plate shoe contact points.Paste a thin layer of high temperature grease on adjustor.Use very little amount of high temperature grease at new rear shoe's contact point with parking brake lever.Attach Parking Brake Lever To Rear Shoe.Fit The Rear Shoe Clip, Pin And Shoe.Set in place Front Shoe Clip, Pin And Shoe.Install Struts And Springs.Install Adjuster And Lower Return Spring.Install Upper Return Springs.Use two lug nuts with washers (for spacing) to hold the disc against hub.Installing Brake Caliper.Ensure that bolts are tightened according to specified torque requirements.Put wheels back on before lowering vehicle.Tighten wheel lug nuts using torque specifications.Check whether handbrakes works properly then adjust it if necessary.

Genuine Toyota Matrix Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Shoes found

View related parts
Toyota Matrix Shoe Assembly, Parking Brake, LH
Part Number: 46540-42010
$25.94 MSRP: $36.26
You Save: $10.32 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Assy, Parking Brake, RH Or Center NO.2; Park Brake Shoes, Shoe
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2012 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK
View related parts
Toyota Matrix Shoe Kit, Rear Brake
Part Number: 04495-01040
$46.76 MSRP: $65.34
You Save: $18.58 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Shoes
- Manufacturer Note: MARK NAC LN521
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | STD, XR | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK
View related parts
Toyota Matrix Shoe Assembly, Parking Brake, LH
Part Number: 46540-20080
$32.50 MSRP: $45.43
You Save: $12.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Assy, Parking Brake, RH Or Center NO.2; Park Brake Shoes, Shoe
- Manufacturer Note: SPECIAL EDITION(USA)
- Replaces: 46540-32020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | S, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; 1ZZFE, 2ZZGE; ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK
View related parts
Toyota Matrix Shoe Kit, Rear Brake
Part Number: 04495-02050
$46.21 MSRP: $64.58
You Save: $18.37 (29%)
ADD TO CART
Product Specifications
- Other Name: Brake Shoes, Rear Shoes
- Manufacturer Note: MARK NAC LN521
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK
View related parts
Toyota Matrix Shoe Kit, Rear Brake
Part Number: 04495-63011
$57.58 MSRP: $80.50
You Save: $22.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Shoes
- Manufacturer Note: MARK AKB LA509A
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Matrix | STD, XR | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK

Toyota Matrix Parking Brake Shoe

If you are in demand for superior quality and affordable OEM Toyota Matrix Parking Brake Shoe, then shop with us! We own a wide range of the reduced-priced genuine Toyota Matrix Parking Brake Shoe. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Matrix Parking Brake Shoe Parts Questions & Experts Answers

Shoe Kit, Rear Brake
04495-01040
Q: How to remove and replace the Parking Brake Shoe on Toyota Matrix?
A: Take off the rear Brake Discs and measure the thickness of the friction material on the shoes. Replace them if it has worn down to 1.0 mm or less. Inspect the drum section of the disc for heat-induced scores, grooves or cracks. Should any of these conditions exist or there be considerable wear to the drum, replace disc. Clean off the brake parts with brake system cleaner. Remove parking brake shoes and upper return springs. Remove lower return spring and adjuster assembly. Unlock front shoe hold-down clip and pin. Take off shoe from vehicle. Take off strut and spring assembly. Dissociate rear shoe from parking brake lever and take it out from its place of installation. Apply light coat of high-temperature brake grease to backing plate shoe contact points.Paste a thin layer of high temperature grease on adjustor.Use very little amount of high temperature grease at new rear shoe's contact point with parking brake lever.Attach Parking Brake Lever To Rear Shoe.Fit The Rear Shoe Clip, Pin And Shoe.Set in place Front Shoe Clip, Pin And Shoe.Install Struts And Springs.Install Adjuster And Lower Return Spring.Install Upper Return Springs.Use two lug nuts with washers (for spacing) to hold the disc against hub.Installing Brake Caliper.Ensure that bolts are tightened according to specified torque requirements.Put wheels back on before lowering vehicle.Tighten wheel lug nuts using torque specifications.Check whether handbrakes works properly then adjust it if necessary.