×
- Live Chat
- 1-888-905-9199
My Garage
My Account
Cart
Genuine Toyota MR2 Blower Motor
A/C Heater Blower Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Blower Motors found
Toyota MR2 Fan Sub-Assy, Blower, Rear
Part Number: 87105-14020$26.76 MSRP: $37.41You Save: $10.65 (29%)Ships in 1-3 Business Days
Toyota MR2 Motor Sub-Assy, Heater Blower, W/Fan
Part Number: 87103-17020$154.55 MSRP: $219.72You Save: $65.17 (30%)Ships in 1-3 Business Days
Toyota MR2 Blower Motor
Toyota MR2 Blower Motor is one of those important car parts that serve in the air conditioning system of the car to manage the air circulation inside the car. Regarding climate control, drivers can also manipulate blower motor controls to increase or to decrease temperature depending on whether one is using the vehicles on the early morning when window is covered with fog or on a very hot day. The blower motor controls are mounted to a module and include wiring to allow access and control of the blower motor. However, if the module or wiring is faulty one then there is no control on the heating and air conditioning. These controls must be adequately maintained and replaced as soon as possible so as to provide efficiency to the Blower Motor of Toyota MR2 vehicles.
If you are in demand for superior quality and affordable OEM Toyota MR2 Blower Motor, then shop with us! We own a wide range of the reduced-priced genuine Toyota MR2 Blower Motor. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota MR2 Blower Motor Parts Questions & Experts Answers
- Q: How to remove and install a blower motor in a Toyota MR2?A: Disconnect the cable from the negative terminal of the battery. Remove the glove box lid, the glove box and the dash panel underneath the glove box. Remove both vent duct screws and the vent duct. Disconnect the blower motor electrical connector, remove the blower motor mounting screws and remove the blower motor. To remove the blower motor, unplug the electrical connector, disconnect the air cooling tube from the motor and remove the three mounting screws. Installation is the reverse of removal.
