Genuine Toyota MR2 Spyder Thermostat Housing

Engine Coolant Thermostat Housing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Thermostat Housings found

  • Toyota MR2 Spyder Thermostat Housing - 16321-22070
    View related parts

    Toyota MR2 Spyder Inlet, Water

    Part Number: 16321-22070
    $19.53 MSRP: $27.30
    You Save: $7.77 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Thermostat Housing, Water Inlet
    • Manufacturer Note: TYPE C:REFER TO ILLUSTRATION
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following Vehicles:
    • 2000-2005 Toyota MR2 Spyder | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZW30L-AKGQHA, ZZW30L-AKLQHA, ZZW30L-AKMQHA
  • Toyota MR2 Spyder Thermostat Housing - 16321-22050
    View related parts

    Toyota MR2 Spyder Inlet, Water

    Part Number: 16321-22050
    $54.49 MSRP: $76.17
    You Save: $21.68 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Thermostat Housing
    • Manufacturer Note: TYPE B:REFER TO ILLUSTRATION
    • Replaces: 16321-22060
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following Vehicles:
    • 2000-2001 Toyota MR2 Spyder | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZW30L-AKMQHA

Toyota MR2 Spyder Thermostat Housing

The Toyota MR2 Spyder Thermostat Housing is another important part which also defines the importance of Toyota MR2 Spyder car series produced from 1999 to 2007. This Thermostat Housing is and essential component of the engine management system, as it houses a thermostat and controls the flow of coolant, thus avoiding situations where the engine will overheat or run at high temperature. The Toyota MR2 Spyder also has a variety of Thermostat Housing which is usually made of hard metal or quality plastic depending on its specifics. Although a metal housing increases the sturdiness of the unit, this often comes with the downside of these metal parts rusting while the plastic ones are protected against this type of wear and tear. Another advantage of the Toyota MR2 Spyder Thermostat Housing is its different water outlet neck styles include; straight, swivel, and angled that increase the routing of the rater's hoses to boost on the car's cooling efficiency as well as installation efficiency. The degree of attention that has been paid to it does not only increase the effectiveness of the toyota MR2 Spyder but at the same augments the safety of the operation. As compatible for MR2 Spyder of different generations, this Thermostat Housing is vital in the automotive market with a primary purpose of ensuring the car's engine's health. This is because the Toyota MR2 Spyder is still seen as an unmistakable convert bit car, and, as evidenced by the thermostatic housing, remains committed to Toyota's ears quality and performance, so that enthusiasts can have the desired car experience.

If you are in demand for superior quality and affordable OEM Toyota MR2 Spyder Thermostat Housing, then shop with us! We own a wide range of the reduced-priced genuine Toyota MR2 Spyder Thermostat Housing. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Related Toyota MR2 Spyder Parts