How to remove and install a fan clutch and Cooling Fan Assembly on Toyota Sequoia?

The coolant overflow reservoir is molded into the fan shroud and cannot be removed separately. Symptoms of fan clutch failure include continuous noisy operation, looseness, vibration, and silicone fluid leaking from the clutch. To check for fan clutch failure, rock the fan back and forth by hand to check for excessive bearing play and turn the blades by hand when the engine is cold to ensure they turn freely. Visually inspect for substantial fluid leakage, a deformed bi-metal spring, or grease leakage from the cooling fan bearing. If any of these conditions exist, the fan clutch should be replaced. When the engine is fully warmed up, turn off the ignition switch and turn the fan by hand. Some resistance should be felt, and if the fan turns easily, it should be replaced. To remove and install the fan clutch, disconnect the negative cable from the battery, remove the engine splash shield and drain the cooling system. Then, remove the engine cover and disconnect the upper hose and overflow hose from the radiator. Remove the fan shroud mounting bolts and unhook the fan shroud mounting tabs from the radiator. Remove the fan clutch-to-water pump mounting nuts and separate the fan from the water pump. Lift the Cooling Fan Assembly and shroud from the engine compartment and separate the fan blades from the viscous clutch hub by removing the mounting nuts. Installation is the reverse of removal.

Genuine Toyota Sequoia Fan Clutch

Cooling Fan Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fan Clutches found

View related parts
Toyota Sequoia Coupling Assembly, Fluid
Part Number: 16210-38070
$145.19 MSRP: $207.11
You Save: $61.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coupling Assy, Fluid
- Replaced by: 16210-38071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2015 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Coupling Assembly, Fluid
Part Number: 16210-50090
$152.09 MSRP: $216.35
You Save: $64.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coupling Assy, Fluid; Clutch, Fan Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Coupling Assembly, Fluid
Part Number: 16210-38071
$145.19 MSRP: $207.11
You Save: $61.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coupling Assy, Fluid; Fan Clutch
- Replaces: 16210-38070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK60L-GKTLKA, 3URFE; USK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Coupling Assembly, Fluid
Part Number: 16210-50101
$102.77 MSRP: $144.94
You Save: $42.17 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coupling Assy, Fluid
- Replaced by: 16210-50102
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2010 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA
View related parts
Toyota Sequoia Coupling Assembly, Fluid
Part Number: 16210-0F010
$102.77 MSRP: $144.94
You Save: $42.17 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coupling Assy, Fluid
- Replaced by: 16210-50102
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Coupling Assembly, Fluid
Part Number: 16210-50100
$102.77 MSRP: $144.94
You Save: $42.17 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coupling Assy, Fluid
- Manufacturer Note: (J)
- Replaced by: 16210-50102
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA

Toyota Sequoia Fan Clutch

The Fan Clutch in Toyota Sequoia is a significant assembly that assists to control the speed of the fan that cools down its engines. the Fan Clutch regulates the speed of the fan according to the temperature and speed of the engine to keep the reputation only as efficient as is necessary. The Fan Clutch in Severo models is generally fitted to the water pump pulley and is RPM activated by the crankshaft. There are various models of Sequoia, where Fan Clutches, including viscous or fluid couplings and electronically controlled clutches, are employed for the accurate control of the engine cooling. These systems prove very vital in the improvement of the overall performance and efficiency of vehicles based on their tooled engine temperature.

If you are in demand for superior quality and affordable OEM Toyota Sequoia Fan Clutch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Fan Clutch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Fan Clutch Parts Questions & Experts Answers

Coupling Assembly, Fluid
16210-38070
Q: How to remove and install a fan clutch and Cooling Fan Assembly on Toyota Sequoia?
A: The coolant overflow reservoir is molded into the fan shroud and cannot be removed separately. Symptoms of fan clutch failure include continuous noisy operation, looseness, vibration, and silicone fluid leaking from the clutch. To check for fan clutch failure, rock the fan back and forth by hand to check for excessive bearing play and turn the blades by hand when the engine is cold to ensure they turn freely. Visually inspect for substantial fluid leakage, a deformed bi-metal spring, or grease leakage from the cooling fan bearing. If any of these conditions exist, the fan clutch should be replaced. When the engine is fully warmed up, turn off the ignition switch and turn the fan by hand. Some resistance should be felt, and if the fan turns easily, it should be replaced. To remove and install the fan clutch, disconnect the negative cable from the battery, remove the engine splash shield and drain the cooling system. Then, remove the engine cover and disconnect the upper hose and overflow hose from the Radiator. Remove the fan shroud mounting bolts and unhook the fan shroud mounting tabs from the radiator. Remove the fan clutch-to-Water Pump mounting nuts and separate the fan from the water pump. Lift the Cooling Fan Assembly and shroud from the engine compartment and separate the fan blades from the viscous clutch hub by removing the mounting nuts. Installation is the reverse of removal.