How do you remove and install a fender on Toyota Sequoia?

Loosen the front wheel lug nuts, raise the vehicle, support it securely on jackstands, and remove the front wheel. Next, remove the front bumper. Detach the mud flaps, fender flares if equipped, inner fender rubber seal, and wheel housing splash shields from the fender by removing the bolts retaining the mud flaps and detaching the splash shields after removing the plastic clips, noting that the number of clips varies by year and trim options. The splash shields are attached between the frame and the fender with plastic screws and clips; remove the plastic Phillips head screw in the center and pry the clips out. Pry up the retaining pins and lift the weather strip off, then remove the retaining bolts from the top edge of the fender, ensuring to pry the retaining clips up as the weather strip is removed. Remove the remaining bolts and detach the fender from the vehicle by taking out the bolt securing the lower rear edge, the bolt retaining the inner rear edge, and the bolt retaining the rear upper edge while opening the door to access the last bolt. After removing the fasteners from the front of the fender, take out the fender, ideally with the help of an assistant to prevent damage to surrounding body panels. Installation is the reverse of removal, ensuring all fasteners are tightened securely.

Genuine Toyota Sequoia Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Fenders found

View related parts
Toyota Sequoia Fender Sub-Assembly, Front
Part Number: 53801-0C230
$291.77 MSRP: $418.39
You Save: $126.62 (31%)
ADD TO CART
Product Specifications
- Other Name: Fender Sub-Assy, Front RH; Fender
- Position: Front Passenger Side
- Replaces: 53801-0C240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, 3URFE; UPK60L-GKTLKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Fender Sub-Assy, Front LH
Part Number: 53802-0C100
$330.75 MSRP: $474.28
You Save: $143.53 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender, Fender Assembly
- Manufacturer Note: W(OVER FENDER)
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Fender Sub-Assembly, Front
Part Number: 53802-0C170
$275.79 MSRP: $395.47
You Save: $119.68 (31%)
ADD TO CART
Product Specifications
- Other Name: Fender Sub-Assy, Front LH; Fender
- Position: Front Driver Side
- Replaces: 53802-0C200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, 3URFE; UPK60L-GKTLKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Fender Sub-Assy, Front RH
Part Number: 53801-0C240
$291.77 MSRP: $418.39
You Save: $126.62 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front Passenger Side
- Replaced by: 53801-0C230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2011 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Fender Sub-Assy, Front RH
Part Number: 53801-0C080
$342.75 MSRP: $491.47
You Save: $148.72 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender, Fender Assembly
- Manufacturer Note: W(OVER FENDER)
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Fender Sub-Assy, Front RH
Part Number: 53801-0C100
$330.75 MSRP: $474.28
You Save: $143.53 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assembly
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Fender Sub-Assy, Front RH
Part Number: 53801-0C070
$343.15 MSRP: $492.06
You Save: $148.91 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender, Fender Assembly
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Sequoia | SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBSKA, UCK35L-GKSSKA
View related parts
Toyota Sequoia Fender Sub-Assy, Front LH
Part Number: 53802-0C070
$343.15 MSRP: $492.06
You Save: $148.91 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender, Fender Assembly
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Sequoia | SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBSKA, UCK35L-GKSSKA
View related parts
Toyota Sequoia Fender Sub-Assy, Front LH
Part Number: 53802-0C080
$342.75 MSRP: $491.47
You Save: $148.72 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender, Fender Assembly
- Manufacturer Note: W(OVER FENDER)
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Fender Sub-Assy, Front LH
Part Number: 53802-0C200
$275.79 MSRP: $395.47
You Save: $119.68 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front Driver Side
- Replaced by: 53802-0C170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2011 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA

Toyota Sequoia Fender

If you are in demand for superior quality and affordable OEM Toyota Sequoia Fender, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Fender. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Fender Parts Questions & Experts Answers

Fender Sub-Assembly, Front
53801-0C230
Q: How do you remove and install a fender on Toyota Sequoia?
A: Loosen the front wheel lug nuts, raise the vehicle, support it securely on jackstands, and remove the front wheel. Next, remove the front Bumper. Detach the mud flaps, fender flares if equipped, inner fender rubber seal, and wheel housing splash shields from the fender by removing the bolts retaining the mud flaps and detaching the splash shields after removing the plastic clips, noting that the number of clips varies by year and trim options. The splash shields are attached between the frame and the fender with plastic screws and clips; remove the plastic Phillips head screw in the center and pry the clips out. Pry up the retaining pins and lift the weather strip off, then remove the retaining bolts from the top edge of the fender, ensuring to pry the retaining clips up as the weather strip is removed. Remove the remaining bolts and detach the fender from the vehicle by taking out the bolt securing the lower rear edge, the bolt retaining the inner rear edge, and the bolt retaining the rear upper edge while opening the door to access the last bolt. After removing the fasteners from the front of the fender, take out the fender, ideally with the help of an assistant to prevent damage to surrounding body panels. Installation is the reverse of removal, ensuring all fasteners are tightened securely.