How do you remove the Mass Air Flow/Intake Manifold Temperature sensor on Toyota Sequoia?

To remove the Mass Air Flow Sensor/Intake Manifold Temperature Sensor, first, ensure the ignition key is in the Off position. Then, disconnect the electrical connector of the sensor by pulling the plug. To remove the Mass Air Flow (MAF) sensor, depress the release tab, pull off the electrical connector, remove the two retaining screws and pull out the sensor. Installation is the reverse of removal.

Genuine Toyota Sequoia Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mass Air Flow Sensors found

View related parts
Toyota Sequoia Meter Sub-Assy, Intake Air Flow
Part Number: 22204-0F030
$96.16 MSRP: $135.54
You Save: $39.38 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor, Meter
- Replaces: 22204-75030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA, UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Meter Sub-Assy, Intake Air Flow
Part Number: 22204-0F010
$126.23 MSRP: $179.46
You Save: $53.23 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA

Toyota Sequoia Mass Air Flow Sensor

In Toyota Sequoia automobiles, the Mass Air Flow Sensor (MAF) is an important component since it is responsible for the optimal performance of the engine by calculating the flow of air aching the engine. This information is communicated to the Powertrain Control Module (PCM), thereby helping in changing the fuel injector timing so as to ensure an optimized air-fuel mixture for combustion. Sequoia models use different types of Mass Air Flow Sensor such as the Vane Meters (VAF) and Hot Wire sensors. The VAF sensor calculates the airflow with the aid of a spring-loaded vane but the following problems tend to manifest, restricted airflow, mechanical wear. The Hot Wire sensor gives higher accuracy by measuring changes in current of a heated wire that is in open airflow though its accuracy can be influenced by contaminants. Caring for the MAF sensor is very important so as not to have problems, such as stalling or incorrect air-fuel ratios.

If you are in demand for superior quality and affordable OEM Toyota Sequoia Mass Air Flow Sensor, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Mass Air Flow Sensor. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Mass Air Flow Sensor Parts Questions & Experts Answers

Meter Sub-Assy, Intake Air Flow
22204-0F030
Q: How do you remove the Mass Air Flow/Intake Manifold Temperature sensor on Toyota Sequoia?
A: To remove the Mass Air Flow Sensor/Intake Manifold Temperature Sensor, first, ensure the ignition key is in the Off position. Then, disconnect the electrical connector of the sensor by pulling the plug. To remove the Mass Air Flow (MAF) sensor, depress the release tab, pull off the electrical connector, remove the two retaining screws and pull out the sensor. Installation is the reverse of removal.