How to replace a tie-rod end on a Toyota Sequoia?

Loosen lug nuts, raise the vehicle, and place on jackstands. Remove the wheel and loosen the tie-rod end locknut. Mark the tie-rod end position, remove the cotter pin and castle nut, then separate the tie-rod end from the steering knuckle with a puller. Detach the tie-rod end from the steering knuckle arm, replace it, and align with the mark. Reverse the process for installation. Tighten all nuts securely.

Genuine Toyota Sequoia Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Tie Rod Ends found

View related parts
Toyota Sequoia Tie Rod End Sub-Assembly, Right
Part Number: 45046-09210
$58.42 MSRP: $81.66
You Save: $23.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Rh; Outer Tie Rod
- Position: Passenger Side
- Replaces: 45046-09350
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Tie Rod End Sub-Assembly, Left
Part Number: 45047-09090
$58.42 MSRP: $81.66
You Save: $23.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Lh; Outer Tie Rod
- Position: Driver Side
- Replaces: 45047-09140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Tie Rod End Sub-Assembly, Right
Part Number: 45046-39465
$47.23 MSRP: $66.02
You Save: $18.79 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Rh; Outer Tie Rod
- Position: Passenger Side
- Replaces: 45046-39395
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Tie Rod End Sub-Assembly, Left
Part Number: 45047-09260
$54.61 MSRP: $76.32
You Save: $21.71 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Lh; Outer Tie Rod
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Tie Rod End Sub-Assembly, Left
Part Number: 45047-39295
$50.44 MSRP: $70.51
You Save: $20.07 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Lh; Outer Tie Rod
- Position: Driver Side
- Replaces: 45047-39235
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Tie Rod End Sub-Assembly, Right
Part Number: 45046-09560
$57.35 MSRP: $80.15
You Save: $22.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Rh; Outer Tie Rod
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA

Toyota Sequoia Tie Rod End

The Tie Rod End in the Toyota Sequoia automobiles connects the steering rack to the steering knuckles to offer the much-needed stability and control in the direction of the vehicle. Comprising of inner and outer tie rod ends, this part is a critical steering system component. In regards to the steering system, Toyota has employed the different types of the Tie Rod Ends in Sequoia series to achieve the optimal possible steering and vehicle control performance enchancment. These different styles may also differ in their structural details and design, yet their primary role is to support the driver in his objective to steer and control the car as needed.

If you are in demand for superior quality and affordable OEM Toyota Sequoia Tie Rod End, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Tie Rod End. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Tie Rod End Parts Questions & Experts Answers

Tie Rod End Sub-Assembly, Right
45046-09560
Q: How to replace a tie-rod end on a Toyota Sequoia?
A: Loosen lug nuts, raise the vehicle, and place on jackstands. Remove the wheel and loosen the tie-rod end locknut. Mark the tie-rod end position, remove the cotter pin and castle nut, then separate the tie-rod end from the Steering Knuckle with a puller. Detach the tie-rod end from the steering knuckle arm, replace it, and align with the mark. Reverse the process for installation. Tighten all nuts securely.