How to replace spark plug on Toyota Sienna?

Spark plug replacement requires a spark plug socket that fits onto a ratchet, lined with a rubber grommet to protect the porcelain insulator of the spark plug and to hold the plug while you insert it into the spark plug hole. You will also need a wire-type feeler gauge to check and adjust the spark plug gap and a torque wrench to tighten the new plugs to the specified torque. On engines equipped with a V-bank cover, remove the three 5-mm cap nuts and detach the cover for access. If you are replacing the plugs, purchase the new plugs, adjust them to the proper gap, and then replace each plug one at a time. The manufacturer specifies that only platinum- or iridium-tipped spark plugs be used on these models. Inspect each of the new plugs for defects. Check the electrode gaps of the new plugs. Remove the upper intake manifold for access to the rear spark plugs. Remove the bolts and detach each ignition coil assembly from the spark plugs. To prevent the possibility of mixing up spark plug wires, work on one spark plug at a time. Remove the wire and boot from one spark plug. If compressed air is available, blow any dirt or foreign material away from the spark plug area before proceeding. Remove the spark plug. Apply a small amount of anti-seize compound to the spark plug threads, but do not get the compound on the spark plug electrodes. Attach the plug wire to the new spark plug, again using a twisting motion on the boot until it is firmly seated on the end of the spark plug. Follow the above procedure for the remaining spark plugs, replacing them one at a time to prevent mixing up the spark plug wires.

Genuine Toyota Sienna Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Spark Plugs found

View related parts
Toyota Sienna Plug, Spark
Part Number: 90919-01233
$10.46 MSRP: $14.62
You Save: $4.16 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spark Plug
- Replaces: 90919-A1003
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2014 Toyota Sienna | LE | 4 Cyl 2.7L | 1ARFE; 1ARFE; ASL30L-PFTEKA, ASL30L-PRTEKA
View related parts
Toyota Sienna Plug, Spark
Part Number: 90919-01247
$13.55 MSRP: $18.99
You Save: $5.44 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spark Plug
- Manufacturer Note: FK20HR11
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2017 Toyota Sienna | CE, LE, SE, STD, XLE | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL33L-SBTDKA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA
View related parts
Toyota Sienna Plug, Spark
Part Number: 90080-91180
$9.51 MSRP: $13.32
You Save: $3.81 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spark Plug
- Replaces: 90080-91181, 90919-01178, 90919-01210, 90919-01237, 90919-T1007, 90919-01211
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2007 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 3MZFE; 1MZFE, 3MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Plug, Spark
Part Number: 90919-01263
$13.08 MSRP: $18.27
You Save: $5.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spark Plug
- Manufacturer Note: FK20HBR8
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2020 Toyota Sienna | LE, SE, STD, XLE | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SBZDHA, GSL33L-SEZDHA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Plug, Spark
Part Number: 90919-01210
$9.51 MSRP: $13.32
You Save: $3.81 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 90080-91180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2007 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 3MZFE; 1MZFE, 3MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Plug, Spark
Part Number: 90919-A1003
$10.46 MSRP: $14.62
You Save: $4.16 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 90919-01233
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2014 Toyota Sienna | LE | 4 Cyl 2.7L | 1ARFE; 1ARFE; ASL30L-PFTEKA, ASL30L-PRTEKA
View related parts
Toyota Sienna Plug, Spark
Part Number: 90919-01194
$8.79 MSRP: $12.41
You Save: $3.62 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 90919-01195, 90080-91116
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2001 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Plug, Spark
Part Number: 90919-01195
$8.79 MSRP: $12.41
You Save: $3.62 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 90919-01194
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2001 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Plug, Spark
Part Number: 90080-91116
$8.79 MSRP: $12.41
You Save: $3.62 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Manufacturer Note: PK20TR11,(L)
- Replaced by: 90919-01194
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2001 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Plug, Spark
Part Number: 90919-A1001
$12.60 MSRP: $17.65
You Save: $5.05 (29%)
Product Specifications
- Replaced by: 90919-01289
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; A25AFXS; AXLH40L-PNXLHA, AXLH40L-PNXSHA, AXLH40L-PNXXHA, AXLH40L-PPXEHA, AXLH40L-PPXXHA, AXLH45L-PNXLHA, AXLH45L-PNXSHA, AXLH45L-PNXXHA, AXLH45L-PPXEHA

Toyota Sienna Spark Plug

This is an ignition part for Toyota Sienna vehicles and like most Spark Plugs, it wears out over time or due to some conditions it is bound to need replacement. These plugs have different periods of usage; this depends on the type of fuel, age of the engine, and way of driving etc. Symptoms of a faulty spark plug are a rough running vehicle, poor acceleration, and a shaking or hesitating engine. All spark plugs should be replaced to prevent more problems from arising or to just keep the engine running at optimum performance. Variations in construction and materials of spark plugs have been developed aimed at increasing the efficiency of ignition and the service life of the components, and the gap and heat range are the essential factors affecting operational effectiveness and protection of the engine.

If you are in demand for superior quality and affordable OEM Toyota Sienna Spark Plug, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sienna Spark Plug. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sienna Spark Plug Parts Questions & Experts Answers

Plug, Spark
90919-01194
Q: How to replace spark plug on Toyota Sienna?
A: Spark plug replacement requires a spark plug socket that fits onto a ratchet, lined with a rubber grommet to protect the porcelain insulator of the spark plug and to hold the plug while you insert it into the spark plug hole. You will also need a wire-type feeler gauge to check and adjust the spark plug gap and a torque wrench to tighten the new plugs to the specified torque. On engines equipped with a V-bank cover, remove the three 5-mm cap nuts and detach the cover for access. If you are replacing the plugs, purchase the new plugs, adjust them to the proper gap, and then replace each plug one at a time. The manufacturer specifies that only platinum- or iridium-tipped spark plugs be used on these models. Inspect each of the new plugs for defects. Check the electrode gaps of the new plugs. Remove the upper intake manifold for access to the rear spark plugs. Remove the bolts and detach each ignition coil assembly from the spark plugs. To prevent the possibility of mixing up spark plug wires, work on one spark plug at a time. Remove the wire and boot from one spark plug. If compressed air is available, blow any dirt or foreign material away from the spark plug area before proceeding. Remove the spark plug. Apply a small amount of anti-seize compound to the spark plug threads, but do not get the compound on the spark plug electrodes. Attach the plug wire to the new spark plug, again using a twisting motion on the boot until it is firmly seated on the end of the spark plug. Follow the above procedure for the remaining spark plugs, replacing them one at a time to prevent mixing up the spark plug wires.