×
- Live Chat
- 1-888-905-9199
My Garage
My Account
Cart
Genuine Toyota Supra Door Handle
Inside Door Handle- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
90 Door Handles found
Toyota Supra Handle, Door Inside
Part Number: 69271-20090-04$26.23 MSRP: $36.66You Save: $10.43 (29%)
Toyota Supra Front Door Outside Handle Assembly Left
Part Number: 69220-14120-H0$155.46 MSRP: $221.01You Save: $65.55 (30%)
| Page 1 of 5 |Next >
1-20 of 90 Results
Toyota Supra Door Handle
If you are in demand for superior quality and affordable OEM Toyota Supra Door Handle, then shop with us! We own a wide range of the reduced-priced genuine Toyota Supra Door Handle. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Supra Door Handle Parts Questions & Experts Answers
- Q: How to remove and install the door latch, lock cylinder, and handle on Toyota Supra?A: Remove the door trim panel and service hole cover, then take out the door window glass. Reach in through the door service hole to disconnect the control link from the lock by popping off the nylon clips that secure the connecting rods to the handle and lock cylinder, and then disconnect the rods. Remove the door lock retaining screws from inside the door and take out the door lock along with the solenoid if equipped. For installation, follow the reverse order of removal. When connecting the outside door handle control link to the lock on 1982 through 1986 models, raise the link by 0.020 to 0.039 inch and insert the pin into the lock hole by turning the adjuster. Disconnect the control link and electrical connector from the lock cylinder, then remove the bolt that retains the lock cylinder to the lock, with installation being the reverse of removal. Remove the retaining screw(s) for the handle, rotate it away, and detach it from the door, with installation again being the reverse of removal.
