How do you replace a tie-rod end on Toyota T100?

Loosen the wheel lug nuts, lift the vehicle and then support the weight of the vehicle properly by placing jackstands and then only remove the wheel. Then, slightly unscrew locknut of the tie-rod and make a note of the position of tie-rod end on the threaded part of the tie rod. To dismantle, the cotter pin is to be removed then the castle nut loosened from the tie-rod end ball joint stud, a puller is then used to pull the tie rod end apart from the steering knuckle, lastly the tie rod end is pulled off from the steering knuckle arm. Remove the old tie-rod end and replace it with a new one which should be slided on the tie-rod in such a manner that is fitted on the mark made on threads of the tie-rod. Last but not the least, installation is the reversal of the removal process ensuring that the tight the tie-rod end ball joint nut to the recommended torque and then tighten the lock nut.

Genuine Toyota T100 Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Tie Rod Ends found

View related parts
Toyota T100 Rod Assy, Tie, RH
Part Number: 45460-39355
$128.45 MSRP: $182.63
You Save: $54.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 45460-39505
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1998 Toyota T100 | DLX, SR5, STD | 6 Cyl 3.0L, 6 Cyl 3.4L | 3VZE, 5VZFE; 3VZE, 5VZFE; VCK20L-TRMREA, VCK20L-TRMREK, VCK20L-TRMSEA, VCK20L-TRMSEK, VCK20L-TRSREA, VCK20L-TRSREK, VCK20L-TRSSEA, VCK20L-TRSSEK, VCK21L-CRMDKA, VCK21L-CRMDKK, VCK21L-CRMSKA, VCK21L-CRMSKK, VCK21L-CRSDKA, VCK21L-CRSDKK, VCK21L-CRSSKA, VCK21L-CRSSKK, VCK21L-TRMDKA, VCK21L-TRMDKK, VCK21L-TRMSKA, VCK21L-TRMSKK, VCK21L-TRSDKA, VCK21L-TRSDKK, VCK21L-TRSSKA, VCK21L-TRSSKK
View related parts
Toyota T100 Tie Rod End Sub-Assembly, Left
Part Number: 45046-39235
$51.28 MSRP: $71.67
You Save: $20.39 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assembly, Tie Rod, Lh
- Position: Driver Side
- Replaced by: 45046-39385
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1996 Toyota T100 | DLX, SR5, STD | 6 Cyl 3.0L, 6 Cyl 3.4L | 3VZE, 5VZFE; 3VZE, 5VZFE; VCK20L-TRMREA, VCK20L-TRMREK, VCK20L-TRMSEA, VCK20L-TRMSEK, VCK20L-TRSREA, VCK20L-TRSREK, VCK20L-TRSSEA, VCK20L-TRSSEK, VCK21L-CRMDKA, VCK21L-CRMSKA, VCK21L-CRMSKK, VCK21L-CRSDKA, VCK21L-CRSSKA, VCK21L-CRSSKK, VCK21L-TRMDKA, VCK21L-TRMDKK, VCK21L-TRMSKA, VCK21L-TRMSKK, VCK21L-TRSDKA, VCK21L-TRSDKK, VCK21L-TRSSKA, VCK21L-TRSSKK
View related parts
Toyota T100 Rod Assy, Tie, LH
Part Number: 45470-39115
$128.45 MSRP: $182.63
You Save: $54.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Driver Side
- Replaced by: 45460-39505
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1994 Toyota T100 | SR5, STD | 6 Cyl 3.0L | 3VZE; 3VZE; VCK20L-TRMREA, VCK20L-TRMREK, VCK20L-TRMSEA, VCK20L-TRMSEK, VCK20L-TRSREA, VCK20L-TRSREK, VCK20L-TRSSEA, VCK20L-TRSSEK
View related parts
Toyota T100 Tie Rod End Sub-Assembly, Left
Part Number: 45046-39355
$51.28 MSRP: $71.67
You Save: $20.39 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Lh
- Position: Driver Side
- Replaced by: 45046-39385
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1998 Toyota T100 | DLX, SR5 | 6 Cyl 3.4L | 5VZFE; 5VZFE; VCK21L-CRMDKA, VCK21L-CRMDKK, VCK21L-CRMSKA, VCK21L-CRMSKK, VCK21L-CRSDKA, VCK21L-CRSDKK, VCK21L-CRSSKA, VCK21L-CRSSKK, VCK21L-TRMDKA, VCK21L-TRMDKK, VCK21L-TRSDKA, VCK21L-TRSDKK
View related parts
Toyota T100 Tie Rod End Sub-Assembly, Left
Part Number: 45046-39265
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Lh; Outer Tie Rod
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1998 Toyota T100 | DLX, SR5, STD | 4 Cyl 2.7L, 6 Cyl 3.0L, 6 Cyl 3.4L | 3RZFE, 3VZE, 5VZFE; 3RZFE, 3VZE, 5VZFE; RCK10L-TRMRKA, RCK10L-TRSRKA, VCK10L-THMREA, VCK10L-THSREA, VCK10L-TRMREA, VCK10L-TRMREK, VCK10L-TRMSEA, VCK10L-TRMSEK, VCK10L-TRSREA, VCK10L-TRSREK, VCK10L-TRSSEA, VCK10L-TRSSEK, VCK11L-CRMDKA, VCK11L-CRMDKK, VCK11L-CRMSKA, VCK11L-CRSDKA, VCK11L-CRSDKK, VCK11L-CRSSKA, VCK11L-THMDKA, VCK11L-THSDKA, VCK11L-TRMDKA, VCK11L-TRMDKK, VCK11L-TRMRKA, VCK11L-TRMSKA, VCK11L-TRSDKA, VCK11L-TRSDKK, VCK11L-TRSSKA

Toyota T100 Tie Rod End

If you are in demand for superior quality and affordable OEM Toyota T100 Tie Rod End, then shop with us! We own a wide range of the reduced-priced genuine Toyota T100 Tie Rod End. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota T100 Tie Rod End Parts Questions & Experts Answers

Tie Rod End Sub-Assembly, Left
45046-39235
Q: How do you replace a tie-rod end on Toyota T100?
A: Loosen the wheel lug nuts, lift the vehicle and then support the weight of the vehicle properly by placing jackstands and then only remove the wheel. Then, slightly unscrew locknut of the tie-rod and make a note of the position of tie-rod end on the threaded part of the tie rod. To dismantle, the cotter pin is to be removed then the castle nut loosened from the tie-rod end ball joint stud, a puller is then used to pull the tie rod end apart from the Steering Knuckle, lastly the tie rod end is pulled off from the steering knuckle arm. Remove the old tie-rod end and replace it with a new one which should be slided on the tie-rod in such a manner that is fitted on the mark made on threads of the tie-rod. Last but not the least, installation is the reversal of the removal process ensuring that the tight the tie-rod end ball joint nut to the recommended torque and then tighten the lock nut.