How do you remove and install the front and rear bumper covers on 2005 through 2009 Toyota Tacoma?

To actually get the front bumper cover out, one has to begin by disconnecting the radiator grille. Make sure the parking brake is set; next, lift the car and put it on jackstands. If equipped, remove the electrical connectors for the fog lights. Next, undo the screws located on the bottom part of the bumper cover, then the side and the upper screws. Rearrange the retainer and the bumper on the lower part of each of the fenders and large retainers have a tab that fits into the slot on the bumper cover and remove the cover from the car. Know that some models may have other components, such as bumper extensions, valance, and spoilers which need fastener to be removed so that the bumper cover can be easily pulled off; these can be removed after pulling off the bumper cover. For installation just reverse the process of removal, slide tabs of the bumper cover into corresponding slots of the body and fasten the bumper with the help of fasteners, an assistant is recommended in this process. The following procedure is for the removal of the rear bumper With the car lifted and well supported securely, make sure that any electrical connectors in the way have been disconnected. While another person keeps the bumper pinned on the frame rails, take out the bolts fastening the bumper mounting bracket on the frame rail. If the model has a factory installed trailer hitch, then it should be removed together with the bumper as a single unit. Wiggle the bumper slightly while releasing the mounting bracket pins from the slots in the frame rails as these are the clips which help in removal and fixing. Next comes the installation, which practically is a reversal of the removal process.

Genuine Toyota Tacoma Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Bumpers found

View related parts
Toyota Tacoma Cover, Rear Bumper
Part Number: 52159-04020
$59.87 MSRP: $84.40
You Save: $24.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Manufacturer Note: NO PAINT REQ.
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2016 Toyota Tacoma | Base, SR5 | 4 Cyl 2.7L, 6 Cyl 4.0L | 1GRFE, 2TRFE; 1GRFE, 2TRFE; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA, TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Cover, Front Bumper
Part Number: 52119-04040
$200.45 MSRP: $287.43
You Save: $86.98 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2012 Toyota Tacoma | Base | 4 Cyl 2.7L, 6 Cyl 4.0L | 1GRFE, 2TRFE; 1GRFE, 2TRFE; GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRPDKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-PRPDKA
View related parts
Toyota Tacoma Cover, Front Bumper
Part Number: 52119-04090
$180.89 MSRP: $259.38
You Save: $78.49 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2016 Toyota Tacoma | Base, SR5 | 4 Cyl 2.7L, 6 Cyl 4.0L | 1GRFE, 2TRFE; 1GRFE, 2TRFE; GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-PRADKA, GRN270L-PRADKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Cover, Front Bumper
Part Number: 52119-AD010
$130.50 MSRP: $185.54
You Save: $55.04 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Upper Cover
- Position: Front
- Replaces: 52119-AD020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.4L, 4 Cyl 2.7L, 6 Cyl 3.4L | 2RZFE, 3RZFE, 5VZFE; 2RZFE, 3RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Cover, Front Bumper
Part Number: 52119-04060
$180.89 MSRP: $259.38
You Save: $78.49 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Manufacturer Note: NO PAINT REQ.
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2016 Toyota Tacoma | Base | 4 Cyl 2.7L | 2TRFE; 2TRFE; TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA
View related parts
Toyota Tacoma Cover, Front Bumper
Part Number: 52119-04904
$200.45 MSRP: $287.43
You Save: $86.98 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Manufacturer Note: PAINT REQ.
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2012 Toyota Tacoma | Base | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN225L-CRFDKA
View related parts
Toyota Tacoma Cover, Front Bumper, L
Part Number: 52119-04907
$190.67 MSRP: $273.41
You Save: $82.74 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Bumper; Bumper Cover
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2022 Toyota Tacoma | Limited, SR5 | 4 Cyl 2.7L, 6 Cyl 3.5L | 2GRFKS, 2TRFE; 2GRFKS, 2TRFE; GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA, TRN245L-CRMSKA, TRN245L-CRTSKA, TRN265L-CRTSKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Cover, Front Bumper
Part Number: 52119-04220
$190.67 MSRP: $273.41
You Save: $82.74 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2022 Toyota Tacoma | Base, SR5 | 4 Cyl 2.7L, 6 Cyl 3.5L | 2GRFKS, 2TRFE; 2GRFKS, 2TRFE; GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTSHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTSHA, GRN330L-PRTSHA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Cover, Front Bumper
Part Number: 52119-04010
$200.45 MSRP: $287.43
You Save: $86.98 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2012 Toyota Tacoma | Base | 4 Cyl 2.7L | 2TRFE; 2TRFE; TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA
View related parts
Toyota Tacoma Cover, Front Bumper, Le
Part Number: 52119-04906
$180.89 MSRP: $259.38
You Save: $78.49 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2016 Toyota Tacoma | Base | 4 Cyl 2.7L, 6 Cyl 4.0L | 1GRFE, 2TRFE; 1GRFE, 2TRFE; GRN225L-CRFDKA, TRN225L-CRMDKA, TRN225L-CRPDKA

Toyota Tacoma Bumper

If you are in demand for superior quality and affordable OEM Toyota Tacoma Bumper, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tacoma Bumper. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tacoma Bumper Parts Questions & Experts Answers

Cover, Rear Bumper
52159-04020
Q: How do you remove and install the front and rear bumper covers on 2005 through 2009 Toyota Tacoma?
A: To actually get the front bumper cover out, one has to begin by disconnecting the radiator Grille. Make sure the parking brake is set; next, lift the car and put it on jackstands. If equipped, remove the electrical connectors for the fog lights. Next, undo the screws located on the bottom part of the bumper cover, then the side and the upper screws. Rearrange the retainer and the bumper on the lower part of each of the fenders and large retainers have a tab that fits into the slot on the bumper cover and remove the cover from the car. Know that some models may have other components, such as bumper extensions, valance, and spoilers which need fastener to be removed so that the bumper cover can be easily pulled off; these can be removed after pulling off the bumper cover. For installation just reverse the process of removal, slide tabs of the bumper cover into corresponding slots of the body and fasten the bumper with the help of fasteners, an assistant is recommended in this process. The following procedure is for the removal of the rear bumper With the car lifted and well supported securely, make sure that any electrical connectors in the way have been disconnected. While another person keeps the bumper pinned on the frame rails, take out the bolts fastening the bumper mounting bracket on the frame rail. If the model has a factory installed trailer hitch, then it should be removed together with the bumper as a single unit. Wiggle the bumper slightly while releasing the mounting bracket pins from the slots in the frame rails as these are the clips which help in removal and fixing. Next comes the installation, which practically is a reversal of the removal process.