Should a valve job be performed by a professional on Toyota Tacoma?

Because of the kind of job involved and the tools, and equipment needed for the job including the servicing of the valves, valve seats, and the valve guides which is normally referred to as the valve job, should always be done by a professional mechanic. An individual working at home can unbolt it and take off the head(s), it is then possible for him to do initial washing and assessments on it and bolt it back before taking it to a dealer service department, or an automotive machine shop for the actual work to be done on it. Performance of the inspection enables determination of the state of the heads and other valve train parts, for recognition of the needed works and new parts when interacting with an automotive machine shop. The dealer service department or the automotive machine shop, will have the valves and springs pulled out, the valves and seats will either be reconditioned or replaced, the guides will be reconditioned, the springs, spring retainers and keepers will be inspected for replacement if necessary, the seals usually will be replaced with new ones, the reassembled valve components as well as checking to ensure that the keeper and installed spring height is correct. Also, if the cylinder head gasket surface is altered, then it will be reconditioned to rectify the problem of warping. When the valve job is done by a professional, the head or any number of heads will be rather like new. Before fitting them back on the engine after use, they should be cleaned again for the removal of any metal pieces and grit that may remain from valving service or head Squaring operations respectively and by use of a blast of compressed air if possible to clear all oil ways or passage.

Genuine Toyota Tacoma Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Exhaust Valves found

View related parts
Toyota Tacoma Valve, Exhaust
Part Number: 13715-0P030
$19.22 MSRP: $26.87
You Save: $7.65 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve
- Manufacturer Note: (L)
- Replaces: 13715-0P010, 13715-31120, 13715-31150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2022 Toyota Tacoma | Limited, SR5 | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA
View related parts
Toyota Tacoma Valve, Exhaust
Part Number: 13715-75050
$21.29 MSRP: $29.75
You Save: $8.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve
- Replaces: 13715-75040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | DLX | 4 Cyl 2.4L, 4 Cyl 2.7L | 2RZFE, 3RZFE; 2RZFE, 3RZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB
View related parts
Toyota Tacoma Valve, Exhaust
Part Number: 13715-75100
$17.24 MSRP: $24.10
You Save: $6.86 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13715-75140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2014 Toyota Tacoma | Base | 4 Cyl 2.7L | 2TRFE; 2TRFE; TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRPDKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-PRPDKA
View related parts
Toyota Tacoma Valve, Exhaust
Part Number: 13715-75140
$17.24 MSRP: $24.10
You Save: $6.86 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve, Valve
- Replaces: 13715-75100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2022 Toyota Tacoma | Base, SR5 | 4 Cyl 2.7L | 2TRFE; 2TRFE; TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Valve, Exhaust
Part Number: 13715-31150
$19.22 MSRP: $26.87
You Save: $7.65 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (J)
- Replaced by: 13715-0P030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2022 Toyota Tacoma | Limited, SR5 | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA
View related parts
Toyota Tacoma Valve, Exhaust
Part Number: 13715-62050
$19.03 MSRP: $26.60
You Save: $7.57 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | DLX, SR5 | 6 Cyl 3.4L | 5VZFE; 5VZFE; VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Valve, Exhaust
Part Number: 13715-31090
$27.72 MSRP: $38.75
You Save: $11.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13715-31091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2016 Toyota Tacoma | Base | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA

Toyota Tacoma Exhaust Valve

If you are in demand for superior quality and affordable OEM Toyota Tacoma Exhaust Valve, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tacoma Exhaust Valve. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tacoma Exhaust Valve Parts Questions & Experts Answers

Valve, Exhaust
13715-75050
Q: Should a valve job be performed by a professional on Toyota Tacoma?
A: Because of the kind of job involved and the tools, and equipment needed for the job including the servicing of the valves, valve seats, and the valve guides which is normally referred to as the valve job, should always be done by a professional mechanic. An individual working at home can unbolt it and take off the head(s), it is then possible for him to do initial washing and assessments on it and bolt it back before taking it to a dealer service department, or an automotive machine shop for the actual work to be done on it. Performance of the inspection enables determination of the state of the heads and other valve train parts, for recognition of the needed works and new parts when interacting with an automotive machine shop. The dealer service department or the automotive machine shop, will have the valves and springs pulled out, the valves and seats will either be reconditioned or replaced, the guides will be reconditioned, the springs, spring retainers and keepers will be inspected for replacement if necessary, the seals usually will be replaced with new ones, the reassembled valve components as well as checking to ensure that the keeper and installed spring height is correct. Also, if the cylinder head gasket surface is altered, then it will be reconditioned to rectify the problem of warping. When the valve job is done by a professional, the head or any number of heads will be rather like new. Before fitting them back on the engine after use, they should be cleaned again for the removal of any metal pieces and grit that may remain from valving service or head Squaring operations respectively and by use of a blast of compressed air if possible to clear all oil ways or passage.