How should piston ring end gaps be checked and corrected before installation on Toyota Tacoma?

Before fitting the new piston rings, measure the ring ends and fine the right size for piston ring groove clearance. LIST: Piston/connecting rod assemblies, new ring sets, piston, and cylinder must be laid down so that the corresponding piston and cylinder can be compared during end gap measurement and subsequent assembly of the engine. Place the first ring with the land of the ring touching the cylinder's side wall, and insert it into cylinder, using the top of the piston, which should be near the bottom of the cylinder. To determine the end clearance, set the feeler gauges in between the ends of the ring until it comes to the correct gauge width where it runs with slight friction. If the gap is too small one can conveniently replace the rings without filing the end. End gap is not a factor unless it is greater than approximately 0.040-inch so double-check the rings for the engine. You should do this for every ring in the first cylinder and the remaining cylinders, always trying to pair them sufficiently: rings, pistons, cylinders. After that checks the gap of the ring end and adjustments needs to be made, the rings have to be fitted to the pistons, the first one is the oil control ring which comprises of three rings. Place the spacer/expander into the groove with the anti-rotation tang, if used, in position and then set the lower side rail in place; it is not necessary to use a piston ring installation tool at this time as it can damage the part. For the upper side rail do the same and make sure both can move freely in the grove. Subsequently, the middle ring which indeed has the identification mark facing upwards should be clipped in the same manner into the middle groove using the piston ring installation tool. Last, fit the top ring in the same manner and aligning the mark in upward position and similarly continue the process with all the pistons and rings.

Genuine Toyota Tacoma Piston Ring Set

Piston Ring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Piston Ring Sets found

View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-31100
$279.13 MSRP: $400.25
You Save: $121.12 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13011-31200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2009 Toyota Tacoma | Base | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-75110
$166.42 MSRP: $236.59
You Save: $70.17 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston Ring Set
- Manufacturer Note: STD
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2016 Toyota Tacoma | Base, SR5 | 4 Cyl 2.7L | 2TRFE; 2TRFE; TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-0P020
$279.13 MSRP: $400.25
You Save: $121.12 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston Ring Set
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2016 Toyota Tacoma | Base | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13013-62100
$369.02 MSRP: $543.20
You Save: $174.18 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: O/S 0.50
- Replaces: 13013-62110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | DLX, SR5 | 6 Cyl 3.4L | 5VZFE; 5VZFE; VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-0P051
$264.18 MSRP: $378.82
You Save: $114.64 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston Ring Set, Piston Rings
- Manufacturer Note: STD
- Replaces: 13011-0P050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2022 Toyota Tacoma | Limited, SR5 | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13013-75110
$197.14 MSRP: $282.68
You Save: $85.54 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: O/S 0.50
- Replaces: 13013-0C030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2016 Toyota Tacoma | Base, SR5 | 4 Cyl 2.7L | 2TRFE; 2TRFE; TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-0P050
$264.18 MSRP: $378.82
You Save: $114.64 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: STD
- Replaced by: 13011-0P051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2017 Toyota Tacoma | Limited, SR5 | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-75041
$299.07 MSRP: $428.85
You Save: $129.78 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Piston Ring Set
- Manufacturer Note: STD
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2004 Toyota Tacoma | DLX | 4 Cyl 2.4L, 4 Cyl 2.7L | 2RZFE, 3RZFE; 2RZFE, 3RZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-75200
$166.67 MSRP: $236.94
You Save: $70.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston Ring Set
- Manufacturer Note: STD
- Replaces: 13011-0C090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2022 Toyota Tacoma | Base, SR5 | 4 Cyl 2.7L | 2TRFE; 2TRFE; TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-62100
$316.52 MSRP: $453.87
You Save: $137.35 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston Ring Set
- Manufacturer Note: STD
- Replaces: 13011-62110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | DLX, SR5 | 6 Cyl 3.4L | 5VZFE; 5VZFE; VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-62110
$316.52 MSRP: $453.87
You Save: $137.35 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13011-62100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1998 Toyota Tacoma | DLX, SR5 | 6 Cyl 3.4L | 5VZFE; 5VZFE; VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13013-62110
$369.02 MSRP: $543.20
You Save: $174.18 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13013-62100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1998 Toyota Tacoma | DLX, SR5 | 6 Cyl 3.4L | 5VZFE; 5VZFE; VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB
View related parts
Toyota Tacoma Ring Set, Piston, O
Part Number: 13013-75200
$197.88 MSRP: $283.74
You Save: $85.86 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ring Set, Piston; Piston Ring Set
- Manufacturer Note: O/S 0.50
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2022 Toyota Tacoma | Base, SR5 | 4 Cyl 2.7L | 2TRFE; 2TRFE; TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13013-75041
$342.31 MSRP: $503.88
You Save: $161.57 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: O/S 0.50
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2004 Toyota Tacoma | DLX | 4 Cyl 2.4L, 4 Cyl 2.7L | 2RZFE, 3RZFE; 2RZFE, 3RZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13011-75040
Product Specifications
- Other Name: Piston Ring Set
- Manufacturer Note: STD
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1999 Toyota Tacoma | DLX | 4 Cyl 2.4L, 4 Cyl 2.7L | 2RZFE, 3RZFE; 2RZFE, 3RZFE; RZN140L-TRMDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN196L-CRPDKAB
View related parts
Toyota Tacoma Ring Set, Piston
Part Number: 13013-75040
Product Specifications
- Manufacturer Note: O/S 0.50
- Replaces: 13013-75050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1999 Toyota Tacoma | DLX | 4 Cyl 2.4L, 4 Cyl 2.7L | 2RZFE, 3RZFE; 2RZFE, 3RZFE; RZN140L-TRMDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN196L-CRPDKAB

Toyota Tacoma Piston Ring Set

If you are in demand for superior quality and affordable OEM Toyota Tacoma Piston Ring Set, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tacoma Piston Ring Set. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tacoma Piston Ring Set Parts Questions & Experts Answers

Ring Set, Piston
13013-62100
Q: How should piston ring end gaps be checked and corrected before installation on Toyota Tacoma?
A: Before fitting the new Piston rings, measure the ring ends and fine the right size for piston ring groove clearance. LIST: Piston/connecting rod assemblies, new ring sets, piston, and cylinder must be laid down so that the corresponding piston and cylinder can be compared during end gap measurement and subsequent assembly of the engine. Place the first ring with the land of the ring touching the cylinder's side wall, and insert it into cylinder, using the top of the piston, which should be near the bottom of the cylinder. To determine the end clearance, set the feeler gauges in between the ends of the ring until it comes to the correct gauge width where it runs with slight friction. If the gap is too small one can conveniently replace the rings without filing the end. End gap is not a factor unless it is greater than approximately 0.040-inch so double-check the rings for the engine. You should do this for every ring in the first cylinder and the remaining cylinders, always trying to pair them sufficiently: rings, pistons, cylinders. After that checks the gap of the ring end and adjustments needs to be made, the rings have to be fitted to the pistons, the first one is the oil control ring which comprises of three rings. Place the spacer/expander into the groove with the anti-rotation tang, if used, in position and then set the lower side rail in place; it is not necessary to use a piston ring installation tool at this time as it can damage the part. For the upper side rail do the same and make sure both can move freely in the grove. Subsequently, the middle ring which indeed has the identification mark facing upwards should be clipped in the same manner into the middle groove using the piston ring installation tool. Last, fit the top ring in the same manner and aligning the mark in upward position and similarly continue the process with all the pistons and rings.