How to remove and install a power steering pump on Toyota Tundra?

Disconnect the cable from the negative terminal of the battery. Remove the engine cover. Raise the front of the vehicle and support it securely on jackstands. Remove the accessory drivebelt or serpentine drivebelt. Remove the right front wheel. Remove the plastic clips from the the rubber seal on the inner fenderwell splash shield, and remove the seal. Remove the drivebelt. Disconnect the electrical connector from the power steering pressure switch. Position a drain pan under the power steering pump. Disconnect the pressure and return hoses from the backside of the pump. Plug the hoses to prevent contaminants from entering. Discard the sealing washers - new ones should be used during installation. Rotate the pump pulley to access the two mounting bolts through the pulley. Remove the pump mounting fasteners and lift the pump out through the wheelwell, taking care not to spill fluid on the painted surfaces. Installation is the reverse of removal. Use new sealing washers on either side of the pressure line fitting. Tighten the pressure line union boll and the pump mounting bolts and nuts. Fill the power steering reservoir with the recommended fluid and bleed the system.

Genuine Toyota Tundra Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Power Steering Pumps found

View related parts
Toyota Tundra Pump Assembly, VANE
Part Number: 44310-0C090
$268.56 MSRP: $385.09
You Save: $116.53 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2021 Toyota Tundra | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK50L-TRTDKA, UPK51L-CRTSKA, UPK51L-PSTSKA, UPK56L-CRTSKA, UPK56L-PSTSKA, USK50L-TRTDKA, USK51L-CRTLGA, USK51L-CRTLKA, USK51L-CRTSGA, USK51L-CRTSKA, USK51L-PSTLGA, USK51L-PSTLKA, USK51L-PSTSGA, USK51L-PSTSKA, USK51L-PSTZGA, USK51L-PSTZKA, USK51L-THTDKA, USK51L-THTSGA, USK51L-THTSKA, USK52L-CHTSGA, USK52L-CHTSKA, USK55L-TRTDGA, USK55L-TRTDKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-PSTZGA, USK56L-PSTZKA, USK56L-THTDGA, USK56L-THTDKA, USK56L-THTSGA, USK56L-THTSKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
Toyota Tundra Pump Assembly, VANE
Part Number: 44310-0C110
$268.56 MSRP: $385.09
You Save: $116.53 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Tundra | Limited, SR5 | 8 Cyl 4.6L | 1URFE; 1URFE; UPK50L-TRTDKA, UPK51L-CRTLKA, UPK51L-CRTSKA, UPK51L-PSTLKA, UPK51L-PSTSKA, UPK51L-THTDKA, UPK52L-CHTSKA, UPK55L-TRTDKA, UPK56L-CRTLKA, UPK56L-CRTSKA, UPK56L-PSTLKA, UPK56L-PSTSKA, UPK56L-THTDKA, UPK57L-CHTSKA
View related parts
Toyota Tundra Pump Assembly, VANE
Part Number: 44310-0C040
$334.98 MSRP: $480.34
You Save: $145.36 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2006 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK31L-PRBLKA, UCK31L-PRBSKA, UCK31L-PRBSKK, UCK31L-PRSLKA, UCK31L-PRSSKA, UCK31L-PRSSKK, UCK41L-PRBLKA, UCK41L-PRBLKK, UCK41L-PRBSKA, UCK41L-PRBSKK, UCK41L-PRSLKA, UCK41L-PRSLKK, UCK41L-PRSSKA, UCK41L-PRSSKK
View related parts
Toyota Tundra Pump Assembly, VANE
Part Number: 44310-0C080
$334.98 MSRP: $480.34
You Save: $145.36 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2010 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-PSALKA, UCK51L-PSASKA, UCK51L-THADKA, UCK52L-CHASKA, UCK55L-TRADKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA
View related parts
Toyota Tundra Pump Assembly, VANE
Part Number: 44310-0C070
$335.92 MSRP: $481.68
You Save: $145.76 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Tundra | SR5 | 6 Cyl 4.0L | 1GRFE; 1GRFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA
View related parts
Toyota Tundra Pump Assembly, VANE
Part Number: 44310-0C010
$328.44 MSRP: $470.96
You Save: $142.52 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Replaces: 44320-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota Tundra | DLX, Limited, SR5 | 6 Cyl 3.4L | 5VZFE; 5VZFE; VCK30L-ARMSKA, VCK30L-ARSLKA, VCK30L-ARSSKA, VCK30L-ARSSKK, VCK30L-TRMDKA, VCK30L-TRMDKK, VCK30L-TRSDKA, VCK30L-TRSDKK, VCK40L-ARMSKA, VCK40L-ARMSKK, VCK40L-ARSLKA, VCK40L-ARSSKA, VCK40L-ARSSKK, VCK40L-TRMDKK, VCK40L-TRMSKA, VCK40L-TRSDKK, VCK40L-TRSSKA
View related parts
Toyota Tundra Pump Assembly, VANE
Part Number: 44310-0C050
$328.42 MSRP: $470.92
You Save: $142.50 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Replaces: 44310-0C060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Tundra | DLX, SR5 | 6 Cyl 4.0L | 1GRFE; 1GRFE; GSK30L-ARBSKA, GSK30L-ARFSKA, GSK30L-TRBDKA, GSK30L-TRBDKK, GSK30L-TRFDKA
View related parts
Toyota Tundra Pump Assembly, VANE
Part Number: 44310-0C030
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Replaces: 44320-0C020, 44320-0C030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | DLX, Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK30L-ARBLKA, 2UZFE; UCK30L-ARSLKA, UCK30L-ARBSKA, UCK30L-ARBSKK, UCK30L-ARSLKA, UCK30L-ARSLKK, UCK30L-ARSSKA, UCK30L-ARSSKK, UCK30L-ASBLKA, UCK30L-ASBSKA, UCK30L-ASSLKA, UCK30L-ASSSKA, UCK30L-TRBDKA, UCK40L-ARBLKA, UCK40L-ARBLKK, UCK40L-ARBSKA, UCK40L-ARBSKK, UCK40L-ARSLKA, UCK40L-ARSLKK, UCK40L-ARSSKA, UCK40L-ARSSKK, UCK40L-ASBLKA, UCK40L-ASBSKA, UCK40L-ASSLKA, UCK40L-ASSSKA, UCK40L-TRBDKA, UCK40L-TRBDKK, UCK40L-TRSDKK, UCK40L-TRSSKA
View related parts
Toyota Tundra Pump Assy, Vane
Part Number: 44320-0C020
Product Specifications
- Replaced by: 44310-0C030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2002 Toyota Tundra | DLX, Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK30L-ARSLKA, UCK30L-ARSLKK, UCK30L-ARSSKA, UCK30L-ARSSKK, UCK40L-ARSLKA, UCK40L-ARSLKK, UCK40L-ARSSKA, UCK40L-ARSSKK, UCK40L-TRSDKK, UCK40L-TRSSKA
View related parts
Toyota Tundra Pump Assembly, VANE
Part Number: 44310-0C120
$295.68 MSRP: $423.98
You Save: $128.30 (31%)
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2015 Toyota Tundra | SR5 | 6 Cyl 4.0L | 1GRFE; 1GRFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, GSK51L-THASKA

Toyota Tundra Power Steering Pump

The Power Steering Pump of Toyota Tundra vehicles is a part that utilizes the energy from the car engine to produce hydraulic energy for turning. The pump delivers this power to the steering system so that the wheels can be easily rotated and therefore this makes maneuvering of large units easier. Power steering system in Toyota Tundra uses hydraulic or electricity operated actuators to help in the steering thus making it much easier at low speed or when the vehicle is not in motion. Where as hydraulic systems always provide a fluid link between the steering wheel and wheels, electric systems use motors. Indeed, even construction vehicles are known to use what is called 'steer by wire' where steering is wholly controlled by electrical power. Overall it can be concluded that Toyota Tundra Power Steering Pumps as vital components in decreasing the effort of the driver and improving the control of the steering.

If you are in demand for superior quality and affordable OEM Toyota Tundra Power Steering Pump, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tundra Power Steering Pump. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tundra Power Steering Pump Parts Questions & Experts Answers

Pump Assembly, VANE
44310-0C090
Q: How to remove and install a power steering pump on Toyota Tundra?
A: Disconnect the cable from the negative terminal of the battery. Remove the engine cover. Raise the front of the vehicle and support it securely on jackstands. Remove the accessory drivebelt or serpentine drivebelt. Remove the right front wheel. Remove the plastic clips from the the rubber seal on the inner fenderwell splash shield, and remove the seal. Remove the drivebelt. Disconnect the electrical connector from the power steering pressure switch. Position a drain pan under the power steering pump. Disconnect the pressure and return hoses from the backside of the pump. Plug the hoses to prevent contaminants from entering. Discard the sealing washers - new ones should be used during installation. Rotate the pump pulley to access the two mounting bolts through the pulley. Remove the pump mounting fasteners and lift the pump out through the wheelwell, taking care not to spill fluid on the painted surfaces. Installation is the reverse of removal. Use new sealing washers on either side of the pressure line fitting. Tighten the pressure line union boll and the pump mounting bolts and nuts. Fill the power steering reservoir with the recommended fluid and bleed the system.