How do you remove the combined fuel pump,Fuel Filter and fuel gauge sender unit on Toyota Yaris?

To remove the combined fuel pump and Fuel Level Sensor in a vehicle, start by disconnecting the battery negative lead and folding the rear seat forwards or removing it. Lift up the carpet and pry up the access cover to reveal the unit. Disconnect the wiring plug and fuel supply pipe from the top of the unit, being cautious of fuel spillage. Remove the evaporative emissions connector by squeezing the tabs together and pulling it off. Unscrew and remove the mounting plate or loosen the lock ring, depending on the model. Lift out the fuel pump/Fuel Level Sensor, being careful not to damage the pump filter or bend the Fuel Level Sensor float arm. To remove the fuel pump from the unit, release the plastic tabs securing the two halves of the unit and separate them. Disconnect the fuel pump connector and unclip the fuel pump lower cover. Lift out the fuel pump lower spacer and slide out the pump from the filter assembly. Refitting is the reverse of removal. To remove the fuel pressure regulator, separate the upper and lower sections of the unit and disconnect the fuel pump wiring plug. Prise up the fuel pressure regulator and remove it. Refitting is the reverse of removal. The fuel filter is housed in the lower section of the unit. Remove the fuel pump and fuel pressure regulator, then refit them to the new fuel filter and reassemble with the upper section of the unit. To remove the Fuel Level Sensor, disconnect the wiring plug and pull out the retaining clip. Note the fitted location of the Fuel Level Sensor when removing it. Refitting is the reverse of removal, ensuring the condition of the fuel filter and rubber seal, tightening the mounting plate bolts or lock ring securely, and checking for correct pump operation and leaks before refitting the access cover.

Genuine Toyota Yaris Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Fuel Level Sensors found

View related parts
Toyota Yaris Gage Assembly, Fuel Send
Part Number: 83320-52261
$94.23 MSRP: $132.83
You Save: $38.60 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assy, Fuel Sender; Fuel Gauge Sending Unit, Fuel Sender Unit
- Replaces: 83320-52180, 83320-52181, 83320-52260
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2018 Toyota Yaris | RS, STD | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP131L-AGMRKA, 1NZFE; NCP91L-AGMRKA, NCP131L-AGMRKK, NCP131L-AGMVKK, NCP131L-AGPRKA, NCP131L-AGPRKK, NCP131L-AGPVKK, NCP131L-AHMRKA, NCP131L-AHMRKK, NCP131L-AHMVKK, NCP131L-AHPRKA, NCP131L-AHPRKK, NCP131L-AHPVKK, NCP131L-CGMRKA, NCP131L-CGMRKK, NCP131L-CGMSKK, NCP131L-CGPRKA, NCP131L-CGPRKK, NCP131L-CGPSKK, NCP131L-CHMRKA, NCP131L-CHMRKK, NCP131L-CHMSKK, NCP131L-CHPRKA, NCP131L-CHPRKK, NCP131L-CHPSKK, NCP91L-AGMRKA, NCP91L-AGMRKK, NCP91L-AGMVKK, NCP91L-AGPRKA, NCP91L-AGPRKK, NCP91L-AGPVKK, NCP91L-AHMRKA, NCP91L-AHMRKK, NCP91L-AHMVKK, NCP91L-AHPRKA, NCP91L-AHPRKK, NCP91L-AHPVKK, NCP93L-BEMRKA, NCP93L-BEMRKK, NCP93L-BEPRKA, NCP93L-BEPRKK
View related parts
Toyota Yaris Gage Assy, Fuel Sender
Part Number: 83320-52181
$94.23 MSRP: $132.83
You Save: $38.60 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 83320-52261
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2011 Toyota Yaris | RS, STD | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP91L-AGMRKA, NCP91L-AGMRKK, NCP91L-AGMVKK, NCP91L-AGPRKA, NCP91L-AGPRKK, NCP91L-AGPVKK, NCP91L-AHMRKA, NCP91L-AHMRKK, NCP91L-AHMVKK, NCP91L-AHPRKA, NCP91L-AHPRKK, NCP91L-AHPVKK, NCP93L-BEMRKA, NCP93L-BEMRKK, NCP93L-BEPRKA, NCP93L-BEPRKK
View related parts
Toyota Yaris Gage Assembly, Fuel Send
Part Number: 83320-52260
$94.23 MSRP: $132.83
You Save: $38.60 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assy, Fuel Sender
- Replaced by: 83320-52261
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2015 Toyota Yaris | RS, STD | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP131L-AGMRKA, NCP131L-AGMRKK, NCP131L-AGMVKK, NCP131L-AGPRKA, NCP131L-AGPRKK, NCP131L-AGPVKK, NCP131L-AHMRKA, NCP131L-AHMRKK, NCP131L-AHMVKK, NCP131L-AHPRKA, NCP131L-AHPRKK, NCP131L-AHPVKK, NCP131L-CGMRKA, NCP131L-CGMRKK, NCP131L-CGPRKA, NCP131L-CGPRKK, NCP131L-CHMRKA, NCP131L-CHMRKK, NCP131L-CHPRKA, NCP131L-CHPRKK, NCP91L-AGMRKA, NCP91L-AGMRKK, NCP91L-AGMVKK, NCP91L-AGPRKA, NCP91L-AGPRKK, NCP91L-AGPVKK, NCP91L-AHMRKA, NCP91L-AHMRKK, NCP91L-AHMVKK, NCP91L-AHPRKA, NCP91L-AHPRKK, NCP91L-AHPVKK, NCP93L-BEMRKA, NCP93L-BEMRKK, NCP93L-BEPRKA, NCP93L-BEPRKK
View related parts
Toyota Yaris Gage Assy, Fuel Sender
Part Number: 83320-52180
$94.23 MSRP: $132.83
You Save: $38.60 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 83320-52261
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2007 Toyota Yaris | RS, STD | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP91L-AGMRKA, NCP91L-AGMRKK, NCP91L-AGMVKK, NCP91L-AGPRKA, NCP91L-AGPRKK, NCP91L-AGPVKK, NCP91L-AHMRKK, NCP91L-AHMVKK, NCP91L-AHPRKK, NCP91L-AHPVKK, NCP93L-BEMRKA, NCP93L-BEMRKK, NCP93L-BEPRKA, NCP93L-BEPRKK
View related parts
Toyota Yaris Gage Assembly, Fuel Send
Part Number: 83320-WB001
$28.81 MSRP: $40.27
You Save: $11.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assy, Fuel Sender; Fuel Gauge Sending Unit, Level Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Yaris | Base, Entry, High | P5 | P5; P5; DADW-NAA, DADW-NAB, DADW-NAC, DAEA-NAA, DAEA-NAB, DAEA-NAC, DAEA-NAD, DAEA-NAE, DAEB-NAC, DAEC-NAC, DAEC-NAD, DAEC-NAE, DAEC-NAF, DAED-NAA, DAEE-NAA, DAEE-NAB, DDF4-NAA, DDF4-NAB, DDF4-NAC, DDF4-NAD, DDF5-NAA, DDF5-NAB, DDF5-NAC, DDF5-NAD, DDF5-NAE, DDF5-NAF, DDF5-NAG, DDF8-NAA, DDF9-NAA, DDF9-NAB, DM0S-NAA, DM0S-NAB, DM0S-NAC, DM0T-NAA, DM0T-NAB, DM0T-NAC, DM0T-NAD, DM0T-NAE, DM0V-NAA, DM0W-NAA, DM0W-NAB

Toyota Yaris Fuel Level Sensor

Being an important device, Toyota Yaris Fuel Level Sensor is responsible for measurements of the fuel levels in the tanks to inform the driver on required re-fueling. This is an electronic device that performs well in conditions of high temperature as well as being designed for low power usage and being simple to bring to calibration. Mainly installed in the fuel tank the common parts of the fuel level sensor include the float, actuating rod as well as the resistor that assists in sending accurate fuel level information to the fuel gauge. Fuel level sensor should be properly functioning as it provides correct values for the fuel gauge; it is most annoying to see the "full" light after refueling. In case of some fixing problems, it is preferable to consult professional service or, at least, to have adequate knowledge of how the sensor works.

If you are in demand for superior quality and affordable OEM Toyota Yaris Fuel Level Sensor, then shop with us! We own a wide range of the reduced-priced genuine Toyota Yaris Fuel Level Sensor. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Yaris Fuel Level Sensor Parts Questions & Experts Answers

Gage Assy, Fuel Sender
83320-52181
Q: How do you remove the combined fuel pump,Fuel Filter and fuel gauge sender unit on Toyota Yaris?
A: To remove the combined fuel pump and Fuel Level Sensor in a vehicle, start by disconnecting the battery negative lead and folding the rear seat forwards or removing it. Lift up the carpet and pry up the access cover to reveal the unit. Disconnect the wiring plug and fuel supply pipe from the top of the unit, being cautious of fuel spillage. Remove the evaporative emissions connector by squeezing the tabs together and pulling it off. Unscrew and remove the mounting plate or loosen the lock ring, depending on the model. Lift out the fuel pump/Fuel Level Sensor, being careful not to damage the pump filter or bend the Fuel Level Sensor float arm. To remove the fuel pump from the unit, release the plastic tabs securing the two halves of the unit and separate them. Disconnect the fuel pump connector and unclip the fuel pump lower cover. Lift out the fuel pump lower spacer and slide out the pump from the filter assembly. Refitting is the reverse of removal. To remove the fuel pressure regulator, separate the upper and lower sections of the unit and disconnect the fuel pump wiring plug. Prise up the fuel pressure regulator and remove it. Refitting is the reverse of removal. The fuel filter is housed in the lower section of the unit. Remove the fuel pump and fuel pressure regulator, then refit them to the new fuel filter and reassemble with the upper section of the unit. To remove the Fuel Level Sensor, disconnect the wiring plug and pull out the retaining clip. Note the fitted location of the Fuel Level Sensor when removing it. Refitting is the reverse of removal, ensuring the condition of the fuel filter and rubber seal, tightening the mounting plate bolts or lock ring securely, and checking for correct pump operation and leaks before refitting the access cover.