Toyota 48811-24050 Bar, Stabilizer, Front

You can Select Your Vehicle to check if 48811-24050 fits your vehicle.

Raise the front of the vehicle and support it securely on jack-stands, then remove the engine under-cover. Disconnect the Sway Bar Kit from the Sway Bar links and remove the bolts from the Sway Bar Kit brackets. For models from 1982 through 1986, detach the strut bar from the control arm on one side only and unbolt the strut bar bracket from the body, followed by removing the Sway Bar Kit bracket bolts and unbolting the strut bar bracket from the body. Next, remove the Sway Bar Kit from the vehicle, ensuring to separate it from the strut bar bracket for the same model years. The installation process is the reverse of removal, making sure to tighten all fasteners to the specified torque.

After raising the vehicle, you should remove the stabilizer bar bracket bolts and detach the brackets. (Note: The procedure shown is for 1982 through 1986 models).