Make sure this part fits

Toyota 90916-02667 Belt, V-RIBBED

2008-2018 Toyota 9091602667

Customer Questions & Expert Answers (3)
Toyota 90916-02667 Belt, V-RIBBED
  • Part Description
    Belt, V(For Fan & Alternator)
  • Part Name Code
    16361A
  • Comment
    (FOR FAN & ALTERNATOR)
  • Replaced By
    90916-A2021
  • Manufacturer
    Toyota
Make sure this part fits
$25.41 MSRP: $35.52
You Save: $10.11 (29%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code16361A
    Manufacturer Part Number90916-02667
    Part DescriptionBelt, V(For Fan & Alternator)
    Manufacturer NoteBANDO
    Item Dimensions11.2 x 3.3 x 1.0 inches
    Item Weight0.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU90916-02667
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2011-2016 Scion tC4 Cyl 2.5L2ARFE; 2ARFE; AGT20L-ALFGKA, AGT20L-ALFGKK, AGT20L-ALTGKA, AGT20L-ALTGKK
    2008-2018 Toyota RAV4LE, Limited, SE, Sport, X, XLE|4 Cyl 2.5L2ARFE; 2ARFE; ASA33L-ANPGKA, ASA33L-ANPGKK, ASA33L-ANPSKA, ASA33L-ANPSKK, ASA33L-ANPXKA, ASA33L-ANPXKK, ASA38L-ANPGKA, ASA38L-ANPSKA, ASA38L-ANPXKA, ASA42L-ANTGKA, ASA42L-ANTMKA, ASA42L-ANTSKA, ASA42L-ANTXKA, ASA44L-ANTGKA, ASA44L-ANTMKA, ASA44L-ANTSKA, ASA44L-ANTXKA
  • Customer Questions & Expert Answers

    Q:
    I would like to know availability and if it is direct fit replacement Posted by ToyotaPartsDeal Specialist
    A:
    You can Select Your Vehicle to check if 90916-02667 fits your vehicle.
    Posted by ToyotaPartsDeal Specialist
    Q:
    How to inspect and replace the drivebelt on Toyota Rav4? Posted by Customer
    A:
    The drivebelt is located at the right end of the engine and its good condition is critical to the engine's operation. Over time, due to its composition and high stress, the drivebelt stretches and deteriorates, necessitating periodic inspections. A single serpentine drivebelt transmits power from the crankshaft to the alternator, water pump, and air conditioning compressor. With the engine stopped, inspect the full length of the drivebelt(s) for cracks and separation of the belt plies. It may be necessary to turn the engine clockwise using a wrench or socket and breaker bar on the crankshaft pulley bolt to thoroughly inspect the belt. Check for fraying, glazing, and any nicks, cracks, distortion, and corrosion on the pulleys. Small cracks in the edges of the belt ribs are not unusual and unless extensive or very deep, belt replacement is not essential. The drivebelt tension is adjusted automatically by a spring-loaded tensioner. To replace the belt, loosen the lug nuts of the right front wheel, raise the vehicle, support it securely on jackstands, and remove the right front wheel. Open the hood, remove the coolant expansion tank mounting bolts and set the tank aside. Remove the inner fender splash shield for access to the tensioner. Place a wrench on the hexagon portion of the tensioner and rotate it clockwise to release the tension. Slip the belt off the pulleys and slowly release the tensioner. Route the new belt over the pulleys, rotating the tensioner to allow the belt to be installed, then release the bell tensioner. Ensure the bell is properly centered in the pulleys. To replace a faulty tensioner, remove the drive-belt, then unscrew the mounting bolt. On 2017 and later models, the tensioner bolt is covered by a dust cap; use a screwdriver to remove the cap and access the mounting bolt. Installation is the reverse of the removal procedure. Finally, install the drivebelt.
    Posted by ToyotaPartsDeal Specialist
    Q:
    There are two part numbers listed for "Belt, V-RIBBED" (90916-02667 & 02668). One is a Bando and the other is Mitsubishi. My car's production date is April 2014, which is accommodated by both part numbers. According the your website, both belts will work for my VIN & Production Date. Is this correct? Posted by Customer: 2014 Scion tC
    A:
    This is the belt number for you vin 90916-A2021.
    Posted by ToyotaPartsDeal Specialist 27/4/2022
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Toyota Part 90916-02667, the Right Choice

To ensure reliability, purchase Toyota part # 90916-02667 Belt, V-RIBBED. It is sometimes referred to as Toyota Drive Belt. For unrivaled quality, OEM parts are the ultimate choice. These parts are manufactured by Toyota's official factory using top-quality materials and undergo strict testing procedures, ensuring outstanding dependability and long-lasting durability. This part fits 2008-2018 Toyota RAV4.

ToyotaPartsDeal.com is a leading supplier of genuine Toyota parts and accessories such as Toyota 9091602667 Belt, V-RIBBED. In need of OEM Toyota parts? Look no further than our extensive inventory of genuine Toyota parts, competitively priced to be highly exceptional in the market. They are all manufacturer-warrantied. Add to that, our easy return policy and swift delivery service, and your shopping experience promises to be the great pleasant ever. For detailed Toyota parts information, click here.

Why choose Toyota Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly