Toyota 22210-62220 Throttle Body Assembly

You can Select Your Vehicle to check if 22210-62220 fits your vehicle.

1. Relieve the fuel pressure and detach the cable from the negative terminal of the battery. 2. Detach the vacuum sensing hose from the regulator. 3. Place a metal container or shop towel under the fuel return hose. 4. Squeeze the hose clamp and detach the fuel return hose from the regulator. 5. On four-cylinder engines, detach the fuel return line and remove the two regulator bolts. On 3.0L V6 engines, use a wrench to unscrew the regulator. On 3.4L V6 models, the regulator is located on the rear of the intake plenum. 6. On 2.4L, 2.7L, and 3.4L engines, remove the pressure regulator mounting bolts and detach the regulator from the fuel rail. On 3.0L engines, unscrew the regulator and retrieve the O-ring. 7. Use a new O-ring and ensure the pressure regulator is installed properly on the fuel rail. The remainder of installation is the reverse of removal.

Disconnect the electrical connector and check the resistance between each terminal with an ohmmeter. The resistance should be 30-50 ohms when cold and 70-90 ohms when warm.

Wait until the engine is completely cool before beginning this procedure.

Yes will come with the IAC vale

22210-62220 ASSY NEW