Toyota 22210-75180 Throttle Body Assembly

You can Select Your Vehicle to check if 22210-75180 fits your vehicle.

Clean and inspect the mounting surface of the lower intake manifold and the air intake plenum before positioning the new gasket. Install the assembly onto the intake manifold, ensuring the gasket remains in place, and tighten the bolts to the specified torque. Installation is otherwise the reverse of removal.

1. Check the IAC valve for correct operation by bridging terminals TE1 and E1 and raising the engine RPM to 900-1300 for ten seconds, then releasing the throttle to ensure the idle returns to specified RPM. 2. Disconnect the air assist hose from the IAC valve and check if the idle speed lowers to approximately 500 RPM. If it remains higher, there may be an air intake leak. 3. Measure the resistance between terminals +B and RSC, and then +B and RSO. If incorrect, replace the IAC valve.