Toyota 22030-50170 Throttle Body Assembly W/Motor

You can Select Your Vehicle to check if 22030-50170 fits your vehicle.

To remove the throttle body, first, remove the engine cover on the V6 models or the throttle body cover on the V8 models. Disconnect the negative battery cable and remove the Air Filter Box on the V6 models or the air intake duct on the V8 models. Disconnect the electrical connector from the throttle body and clamp off the coolant hoses. Loosen the hose clamps and disconnect both coolant hoses from the throttle body. Remove the throttle body mounting fasteners and the old throttle body O-ring type gasket. Inspect the gasket and replace it if necessary. To install, reverse the removal steps and tighten the mounting fasteners to the torque specifications. Check the coolant level and add as necessary.