Toyota 44610-06471 Booster Assembly, Brake

You can Select Your Vehicle to check if 44610-06471 fits your vehicle.

Installation is the reverse of removal. Tighten the clevis locknut and booster mounting nuts securely. After final installation of the master cylinder, brake hoses, and lines, adjust brake pedal height, freeplay, and pedal reserve distance, then bleed the system before normal vehicle operation.

Regular brake system inspections are crucial to identify issues promptly. Brake problems can manifest as vehicle pulling, noises, excessive pedal travel, pulsations, or fluid leaks. Early detection helps prevent costly damage and ensures safe operation.

Perform the following checks on the power brake booster: Depress the brake pedal multiple times with the engine off to ensure the pedal reserve distance remains unchanged. Depress the pedal and start the engine. If the pedal slightly moves down, it's operating normally. For an airtightness check, start the engine and turn it off after a minute or two. Depress the brake pedal slowly multiple times; if the pedal depression lessens with each press, the booster is airtight. Depress the brake pedal with the engine running, then stop the engine while keeping the pedal pressed. If the pedal reserve travel doesn't change after holding it for 30 seconds, the booster is airtight.

Regular brake system inspections are crucial to identify issues promptly. Brake problems can manifest as vehicle pulling, noises, excessive pedal travel, pulsations, or fluid leaks. Early detection helps prevent costly damage and ensures safe operation.