Toyota 44610-06760 Booster Assembly, Brake

You can Select Your Vehicle to check if 44610-06760 fits your vehicle.

Perform a brake booster check by starting the engine with the brake fully depressed and observing pedal movement. The pedal travel should remain consistent. Turn off the engine, hold the pedal for 30 seconds, and restart the engine to confirm decreased pedal travel with each subsequent application. Check the parking brake by counting clicks when engaging it with the handle or pedal. Adjust the parking brake if the click count deviates from the specified value. Alternatively, verify parking brake effectiveness on a steep hill in Neutral; if the vehicle rolls, perform parking brake adjustments.

Perform the following checks on the power brake booster: Depress the brake pedal multiple times with the engine off to ensure the pedal reserve distance remains unchanged. Depress the pedal and start the engine. If the pedal slightly moves down, it's operating normally. For an airtightness check, start the engine and turn it off after a minute or two. Depress the brake pedal slowly multiple times; if the pedal depression lessens with each press, the booster is airtight. Depress the brake pedal with the engine running, then stop the engine while keeping the pedal pressed. If the pedal reserve travel doesn't change after holding it for 30 seconds, the booster is airtight.

Installation is the reverse of removal. Tighten the clevis locknut and booster mounting nuts securely. After final installation of the master cylinder, brake hoses, and lines, adjust brake pedal height, freeplay, and pedal reserve distance, then bleed the system before normal vehicle operation.

Perform a brake booster check by starting the engine with the brake fully depressed and observing pedal movement. The pedal travel should remain consistent. Turn off the engine, hold the pedal for 30 seconds, and restart the engine to confirm decreased pedal travel with each subsequent application. Check the parking brake by counting clicks when engaging it with the handle or pedal. Adjust the parking brake if the click count deviates from the specified value. Alternatively, verify parking brake effectiveness on a steep hill in Neutral; if the vehicle rolls, perform parking brake adjustments.