Toyota 44610-07112 Booster Assembly, Brake

You can Select Your Vehicle to check if 44610-07112 fits your vehicle.

Power brake booster units should not be disassembled and require special tools, making replacement with a new or rebuilt unit necessary. Start by removing the brake master cylinder, charcoal canister, and air cleaner assembly, then disconnect the vacuum hose from the brake booster. Inside the vehicle, remove the steering column cover pad and locate the clevis connecting the booster pushrod to the brake pedal. Remove the clevis pin retaining clip and the pin. Finally, remove the four nuts and washers securing the brake booster to the firewall and slide it out.

Remove the four nuts and washers holding the brake booster to the firewall, then slide the booster straight out from the firewall until the studs clear the holes.