Toyota 44610-33610 Booster Assembly, Brake

You can Select Your Vehicle to check if 44610-33610 fits your vehicle.

Remove the air cleaner assembly. On some models, it may also be necessary to unbolt the charcoal canister and position it out of the way.

Power brake booster units should not be disassembled and require special tools, making replacement with a new or rebuilt unit necessary. Start by removing the brake master cylinder, charcoal canister, and air cleaner assembly, then disconnect the vacuum hose from the brake booster. Inside the vehicle, remove the steering column cover pad and locate the clevis connecting the booster pushrod to the brake pedal. Remove the clevis pin retaining clip and the pin. Finally, remove the four nuts and washers securing the brake booster to the firewall and slide it out.