Toyota 04428-12260 Front Cv Joint Boot Kit, In Outboard, Right

You can Select Your Vehicle to check if 04428-12260 fits your vehicle.

Rock the steering wheel to check for excessive free play, indicating worn components. Symptoms like body movement and binding during steering may suggest faulty parts. Test shock absorbers by pushing down on each vehicle corner and listen for suspension noises. Raise the vehicle to inspect tires for irregular wear and proper inflation. Check the universal joint, steering gear housing, dust seals, boots, steering linkage, tie-rod ends, and all suspension components for damage and looseness. Inspect ball joint boots for damage and leaking grease, and CV boots for tears and loose clamps.

Using a screwdriver, carefully pry up on the edge of the outer boot and push it away from the CV joint. Old and worn boots can be cut off. Pull the inner CV joint boot back from the housing and slide the housing from the tripod.

Common warning signs of potential brake issues include:The vehicle pulling to one side when braking.Squealing or dragging noises during braking.Excessive brake pedal travel.Pedal pulsations.Brake fluid leaks.

To reassemble, wrap the splines on the axleshaft with electrical tape and slide the clamps and boot(s) onto it. Place the inner stop-ring and tripod on the shaft, aligning the marks. Pack the CV joint(s) with grease and apply some to the inside of the boot(s). Insert the tripod into the housing and pack the remaining grease around it. Slide the boot into place, ensuring both ends seat in their grooves. Equalize the pressure in the boot and tighten the clamps.