Toyota 33820-06121 Cable Assy, Transmission Control

You can Select Your Vehicle to check if 33820-06121 fits your vehicle.

Remove the center console. Raise the vehicle and support it securely on jackstands. Remove the retaining clips and washers from the cable ends at the transaxle. Remove the large clips that retain the shift and select cables to the bracket on the transaxle. Remove the screws that attach the cable retainer, if applicable, to the engine side of the firewall. Remove the outer retainer and grommet. Remove the clips and washers that attach the shift and select cables to the shift lever. Remove the large clip-type cable retainers that attach the cables to the bracket at the forward end of the shift lever base. Remove the inner retainer and grommet from the passenger side of the firewall. Pull the cable(s) out through the firewall from the engine side. Installation is the reverse of removal.

Remove the retaining clips and washers from the cable ends at the transaxle.

Pull the cable through the firewall.

While holding the lever with a slight pressure toward the REVERSE position, tighten the swivel nut securely.