Toyota 33820-52020 Cable Assy, Transmission Control

You can Select Your Vehicle to check if 33820-52020 fits your vehicle.

Disconnect the two cables from the levers and remove the retaining plates. Remove the four bolts securing the unit and lift it out. Disconnect the cables from the levers, detach their collars, and jack up the car. Underneath, remove the bolts securing the cables' floor plate. Draw the cables through from inside the car. In the engine compartment, remove the clips holding the cables to the transmission bracket. Unhook the cable end fittings from the shift/select mechanism. The shift cables can now be removed. To refit, reverse the process and check all gears before driving.

Start by removing the centre console. Then, unscrew the nut at the front of the lever and withdraw the selector cable end fitting. Lift the cable to detach the retaining plate from the front of the lever assembly and move the cable to the side.