Make sure this part fits

Toyota 41110-35A50 Rear Differential Carrier Assembly

2005-2014 Toyota Tacoma 4111035A50

Customer Questions & Expert Answers (2)
Toyota 41110-35A50 Rear Differential Carrier Assembly
  • Part Description
    Carrier Assy, Differential, Rear
  • Part Name Code
    41110
  • Position
    Rear
  • Replaced By
    41110-35A51
  • Manufacturer
    Toyota
Make sure this part fits
$1322.99 MSRP: $1947.45
You Save: $624.46 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code41110
    Manufacturer Part Number41110-35A50
    Part DescriptionCarrier Assy, Differential, Rear
    Item Dimensions35.4 x 15.8 x 15.3 inches
    Item Weight87.60 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU41110-35A50
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2005-2014 Toyota TacomaBase|6 Cyl 4.0L1GRFE; 1GRFE; GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA
  • Customer Questions & Expert Answers

    Q:
    Is the above part number correct or is there another correct number for my car? Posted by ToyotaPartsDeal Specialist
    A:
    You can Select Your Vehicle to check if 41110-35A50 fits your vehicle.
    Posted by ToyotaPartsDeal Specialist
    Q:
    How to remove and install the Automatic disconnect Differential (ADD) and its actuator on 2005 through 2009 Toyota Tacoma? Posted by Customer
    A:
    The ADD connects and disconnects the power flow through the dipstick, namely the right front axleshaft when the 4WD mode is engage and disconnects them when the 2WD mode is engaged. In case the transition to or from 4WD causes problems, it is recommended that the ADD system be taken for assessment to a competent mechanic familiar with 4WD cars. To demodulate the differential carrier, loosen the wheel lug nuts, lift the vehicle and secure on jack stands and then, remove the wheels. Next, two splash shields should be dismantled along with the differential lubricant; finally, please remove two more splash shields and drain lubricant from the differential. Continue to the removal of the driveaxles, to separate the driveshaft from the front differential, Suspension of front part of the driveshaft with a piece of wire. Loosen the front stabilizer bar and brackets, then the ABS wheel speed sensors will also have to be detached. Remove the breather tube bracket, remove the nuts/screws holding the vacuum tubing bracket to the differential, disconnect the electrical connector of the actuator and pull off the vacuum lines from it. If you are changing the differential, place help under it using a transmission jack or a floor jack and then remove the differential rear mounting nut and the two front mounting bolts/nuts to lift up the differential. The process of installation is the exact opposite of the removal procedure, and again, be sure to refill the differential with the recommended lubricant and ensure the lugnuts and suspension fasteners are tightened to the manufacturer's torque spec. For the ADD actuator, take the car off the ground using jackstand, then reinstall the splash shield and push in the four bolts until the actuator can be pulled/off. ALl these and other surfaces in contact with the differential and actuator must be clean and as a final step to the installation processes, a 'thin bead of new RTV sealant should be applied on the mating surfaces of the two before tightening the bolts in an opposite sequence to the one applied while unbolting the old actuator from the differential.
    Posted by ToyotaPartsDeal Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Toyota Part 41110-35A50, the Right Choice

To ensure reliability, purchase Toyota part # 41110-35A50 Rear Differential Carrier Assembly. It is sometimes referred to as Toyota Differential. For unrivaled quality, OEM parts are the ultimate choice. These parts are manufactured by Toyota's official factory using top-quality materials and undergo strict testing procedures, ensuring outstanding dependability and long-lasting durability. This part fits 2005-2014 Toyota Tacoma.

ToyotaPartsDeal.com is a leading supplier of genuine Toyota parts and accessories such as Toyota 4111035A50 Rear Differential Carrier Assembly. In need of OEM Toyota parts? Look no further than our extensive inventory of genuine Toyota parts, competitively priced to be highly exceptional in the market. They are all manufacturer-warrantied. Add to that, our easy return policy and swift delivery service, and your shopping experience promises to be the great pleasant ever. For detailed Toyota parts information, click here.

Why choose Toyota Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly