Toyota 83841-06010 Case, Combination Meter

You can Select Your Vehicle to check if 83841-06010 fits your vehicle.

To remove the instrument panel, begin by disconnecting the negative and positive battery cables. Proceed to remove the dashboard trim panels and the center floor console, followed by the instrument cluster and glove box. Disconnect and remove the passenger's side airbag if present. Take out the audio unit and the air conditioning control panel from the center of the dashboard. Remove the driver's knee bolster and reinforcement panel, and detach the bolts securing the steering column before lowering it away from the instrument panel. Prior to disconnecting various electrical connectors, consider marking them with masking tape and a marking pen. Remove all fasteners including bolts, screws, and nuts that secure the instrument panel to the body. Once all fasteners are removed, lift the panel and pull it away from the windshield, then extract it through the driver's door opening. For installation, follow the reverse steps of the removal procedure.

Disconnect any electrical connectors that may interfere with removal.

For reinstallation of the instrument cluster, follow the reverse steps of the removal procedure. This involves carefully connecting electrical connectors, securing the cluster, and replacing the instrument cluster bezel.

Remove the audio unit from the center of the dashboard.