Toyota 69005-06690 Cylinder & Key Set

You can Select Your Vehicle to check if 69005-06690 fits your vehicle.

To remove the door latch, you need to raise the window and remove the door trim panel and watershield. Then, through the large access hole, disengage the rod to the outside handle and lock cylinder. Remove the plastic clips attaching the door lock rod. After that, remove the screws securing the latch to the door and disconnect the electrical connector. Finally, pull the latch back and remove it through the door opening with the two cables from the inside door handle still attached.

Install the steering lock actuator and steering column clamp with new steering lock shear-head bolts, then tighten the bolts until their heads break off.