Toyota 69005-0R050 Cylinder & Key Set

You can Select Your Vehicle to check if 69005-0R050 fits your vehicle.

Slide the handle rearward and pull it off of the door. If equipped, disconnect the electrical connector from the handle.

17. Remove the steering column by following the general steering column repair procedures in Section 8. Place the steering column shaft in a soft-jaw vise and tighten firmly without crushing or damaging it. 18. Use a center punch to mark the center of the tapered-head bolts. 19. Use a 3 or 4 mm drill bit to drill a hole in the center of the bolt. 20. Using a screw extractor that fits into the hole, turn the bolt counterclockwise to remove it. 21. Install the steering lock actuator and steering column clamp with new shear bolts, then tighten the bolts until their heads break off.