Toyota 47201-33210 Brake Master Cylinder Sub-Assembly

You can Select Your Vehicle to check if 47201-33210 fits your vehicle.

Loosen the fittings at the ends of the brake lines where they enter the master cylinder using a flare-nut wrench to prevent rounding off the flats.

Start by unplugging the electrical connector for the brake fluid level warning switch. Then, use a syringe to remove as much fluid as possible from the reservoir. Place rags under the fittings and prepare caps or plastic bags to cover the ends of the lines once they're disconnected. Loosen the fittings at the ends of the brake lines where they enter the master cylinder using a flare-nut wrench. Pull the brake lines away from the master cylinder and plug the ends to prevent contamination. Remove the nuts attaching the master cylinder to the power booster and carefully pull the master cylinder off the studs.