Toyota 31250-14130 Disc Assembly, Clutch

You can Select Your Vehicle to check if 31250-14130 fits your vehicle.

To remove clutch components, the transmission must be removed. Use a clutch alignment tool to support the disc during removal. Mark the flywheel and pressure plate for alignment. Loosen the pressure plate bolts, then remove the plate and clutch disc. Examine the flywheel, pilot bearing, and disc for wear. Replace the pilot bearing using a puller if needed. Check the clutch disc for damage and always replace the release bearing with it. Inspect the pressure plate for grooves. Clean and align all parts before installation. Tighten bolts in a diagonal pattern, lubricate the release bearing, and reinstall the transmission.