Toyota 17801-0V020 Air Filter Element Sub-Assembly

You can Select Your Vehicle to check if 17801-0V020 fits your vehicle.

To remove the air filter, release the spring clips that keep the two halves of the air filter housing together, then pull the cover away. Noting how the filter is installed, remove the air filter element. Inspect the outer surface of the filter element. If it is dirty, replace it. If it is only moderately dusty, it can be reused by blowing it clean from the back to the front surface with compressed air. Because it is a pleated paper type filter, it cannot be washed or oiled. If it cannot be cleaned satisfactorily with compressed air, discard and replace it. While the cover is off, be careful not to drop anything down into the housing. Never drive the vehicle with the air cleaner removed. Excessive engine wear could result and backfiring could even cause a fire under the hood. Wipe out the inside of the filter housing. Place the new filter into the air cleaner housing, making sure it seats properly. Installation of the cover is the reverse of removal.

After accessing the air filter, you should lift the cover up and remove the air filter element.

On V6 models, you need to release the spring clips that keep the two halves of the air cleaner housing together.

Either option will work with your vin number.

our system won't break down for Canadian VINs have to get correct number from a local dealer

This is an engine air filter

This filter is for a 4 cylinder vehicle

This is one per order

Yes, a dirty air filter can cause a factor in lower gas mileage