Toyota 81110-06200 Passenger Side Headlight Assembly

You can Select Your Vehicle to check if 81110-06200 fits your vehicle.

Headlight aiming is vital for safety and should be checked annually, when installing new headlights, or after front-end bodywork. However, professional adjustment is recommended. Some models have a headlight leveling system, requiring professional adjustment. For others, there's usually an adjustment screw on each headlight housing. To adjust, use masking tape, a blank wall, and a level floor. Position tape on the wall in line with the vehicle and headlight centers. Adjust with the vehicle 25 feet from the wall, level, with a half-full gas tank and no heavy load. The low beam's high-intensity zone should be two inches below and to the side of the headlight line, away from traffic. Use the vertical screw to adjust the beam's height, and the horizontal screw for left or right. With high beams, the high-intensity zone should be centered just below the horizontal line. If perfect positioning for both beams isn't possible, prioritize low beams. Professional adjustment is advised as soon as possible.