Toyota 86520-14210 Horn Assy, Low Pitched

You can Select Your Vehicle to check if 86520-14210 fits your vehicle.

Before beginning electrical diagnosis, check the fuses. Disconnect the electrical connector from the horn. To test the horn, connect battery voltage to the two terminals with a pair of jumper wires; if the horn doesn't sound, replace it. If the horn does sound, check for voltage at the terminal when the horn button is depressed. If there's voltage at the terminal, check for a bad ground at the horn. If there's no voltage at the horn, check the relay, noting that most horn relays are either the four-terminal or externally grounded three-terminal type. If the relay is functioning, check for voltage to the relay power and control circuits; if either circuit is not receiving voltage, inspect the wiring between the relay and the fuse panel. If both relay circuits are receiving voltage, depress the horn button and check the circuit from the relay to the horn button for continuity to ground. If there's no continuity, check the circuit for an open; if there's no open circuit, replace the horn button. If there's continuity to ground through the horn button, check for an open or short in the circuit from the relay to the horn. To replace the horn(s), remove the radiator grille, disconnect the electrical connector, and remove the bracket bolt. Installation is the reverse of removal.