Toyota 89621-26010 Igniter Assy

You can Select Your Vehicle to check if 89621-26010 fits your vehicle.

The igniter is a different unit from the distributor; breakerless ignition system igniter is set on the right side of the engine compartment over the air intake duct for 4-cylinder models or to the left side adjacent to the ignition coil for 3.0L V7 models. In distributorless ignition systems there is the igniter incorporated in the coil assembly and hence cannot be refitted. Start by loosening the cable of the negative terminal from the battery, and if the stereo has an anti-theft system then ensure that you have the right code to enter. Then, unplug the electrical connector from the igniter, after that take out the screws at the bracket and at last, the igniter bracket assembly can be held and removed from the engine compartment. The last step of the process resembles the previous, that is, they are carried out in the reversed sequence to installation.

Detach the cable from the negative terminal of the battery. Caution: If the stereo in your vehicle is equipped with an anti-theft system, make sure you have the correct activation code before disconnecting the battery. Disconnect the electrical connector from the igniter. Remove the screws and detach the igniter from the bracket. Remove the bolts that retain the igniter assembly to the firewall. Installation is the reverse of removal.

The igniter (module) in breakerless ignition systems is a separate component from the distributor. It is mounted on the right side of the engine compartment under the air intake duct on four-cylinder engines, or on the left side of the engine compartment together with the ignition coil on 3.0L V7 engines.