Toyota 23209-79095 Injector Assy, Fuel

You can Select Your Vehicle to check if 23209-79095 fits your vehicle.

Clean and inspect the mounting surface of the lower intake manifold and the air intake plenum before positioning the new gasket. Install the assembly onto the intake manifold, ensuring the gasket remains in place, and tighten the bolts to the specified torque. Installation is otherwise the reverse of removal.

1. Detach the cable from the negative terminal of the battery. 2. Disconnect the electrical connectors at the ISC/IAC valve, TPS, and EGR/EVAP canister control solenoid. 3. Detach the accelerator cable and transmission linkage from the throttle body assembly. 4. Remove the EGA pipe from the EGA valve. 5. Label and detach the vacuum lines from the air intake plenum, EGA valve, and fuel pressure regulator. 6. Detach the PCV system by disconnecting the hose from the fitting on the air intake plenum. 7. Remove the plenum ground cable and bolt. 8. Detach the coolant hoses from the throttle body and plug them. 9. Remove the air intake plenum retaining bolts and nuts. 10. Remove the air intake plenum and throttle body as an assembly from the lower intake manifold.

1. Relieve the fuel pressure and detach the cable from the negative terminal of the battery. 2. Detach the vacuum sensing hose from the regulator. 3. Place a metal container or shop towel under the fuel return hose. 4. Squeeze the hose clamp and detach the fuel return hose from the regulator. 5. On four-cylinder engines, detach the fuel return line and remove the two regulator bolts. On 3.0L V6 engines, use a wrench to unscrew the regulator. On 3.4L V6 models, the regulator is located on the rear of the intake plenum. 6. On 2.4L, 2.7L, and 3.4L engines, remove the pressure regulator mounting bolts and detach the regulator from the fuel rail. On 3.0L engines, unscrew the regulator and retrieve the O-ring. 7. Use a new O-ring and ensure the pressure regulator is installed properly on the fuel rail. The remainder of installation is the reverse of removal.

separately 1