Toyota 12363-03080 Insulator, Engine Mounting, Center

You can Select Your Vehicle to check if 12363-03080 fits your vehicle.

To check the engine mounts, you should raise the vehicle and securely support it on jackstands. Position a jack under the engine oil pan and place a large block of wood between the jack head and the oil pan. Raise the engine slightly to remove the weight from the mounts. Do not position the wood block under the drain plug. Then, visually inspect the mounts for signs of damage and use a large screwdriver or pry bar to check for any movement. If movement is observed, lower the engine and tighten the mount fasteners. Applying rubber preservative to the mounts can help slow down deterioration.

To remove the engine movement control rod assembly in V6 models, you need to take out the two through-bolts and the engine movement control rod.