Toyota 69350-0T020 Back Door Lock Assembly

You can Select Your Vehicle to check if 69350-0T020 fits your vehicle.

Do put on gloves while working around the door opening to avoid cuts from the sharp metal edges. To take out the door latch, open the window and remove the door trim panel and watershield. Disengage the rods from the handle and lock cylinder through the large access hole. At the latch, cut off all electrical connectors and release all handle-to-latch cables. Unscrew and lift out those latches that have been screwed into their places within doors. To remove outside handle and door lock cylinder assembly, raise window and remove door trim panel and watershield. Work via hi aperture unclip plastic fasteners securing outside door lock to latch rod and outside door handle to latch rod. Take plug out of end of door, remove screw holding in lock cylinder. Unfasten bolts holding handle onto inside of door; remove handle frame with it. For inside door handle removal take off door trim panel first. Remove screws that fixate handles into place in a panel.

Once every 3000 miles or every three months.

It reduces wear and ensures free movement.