Toyota 17111-88601 Manifold, Intake

You can Select Your Vehicle to check if 17111-88601 fits your vehicle.

Remove the fuel rail and injectors as an assembly. Also, remove the throttle body from the intake manifold. Label and disconnect the following components required for intake manifold removal: PCV hose, Accelerator cable, Air intake duct and air filter cover, Throttle body, Fuel rail and injectors. Note: 2005 and later models have a "drive-by-wire" electronic throttle control, which does not use a cable. Disconnect the electrical connector at the throttle motor on the throttle body.

Remove the engine cover, then release the two clamps and set aside the fuel-injection wiring harness. Remove the fuel rail and injectors as an assembly and also remove the throttle body from the intake manifold.