Toyota 83800-04D11 Meter Assy, Combination

You can Select Your Vehicle to check if 83800-04D11 fits your vehicle.

An experienced do-it-yourselfer is recommended to perform the following procedure, and taking detailed notes on the assembly of various parts and electrical connectors will facilitate reassembly. Begin by disconnecting the cable from the negative battery terminal. Next, remove the center floor console along with all dashboard trim panels and components. Carefully pry the small side panel away from the instrument panel until the tabs are released. Then, remove the front pillar trim from both sides of the vehicle by prying off the bolt covers, removing the exposed bolts, and pulling the pillar trim away from the pillar. After that, remove the instrument cluster and disconnect the electrical connector for the passenger's side airbag, along with its bracket mounting bolts. Most components mounted to the instrument panel will come off with it, so only disconnect the necessary electrical connectors and detach the wiring harnesses, labeling them if needed. Proceed to remove the instrument panel mounting fasteners, and once all are removed, carefully pull the panel away from the reinforcement bar and windshield, ensuring no wiring harnesses remain connected. It is advisable to have an assistant for this task. Finally, installation is the reverse of removal, ensuring all wiring harnesses and electrical connectors are properly secured and connected.

Pull out the cluster and disconnect the electrical connectors.