Toyota 83800-07320 Meter Assembly, Combination

You can Select Your Vehicle to check if 83800-07320 fits your vehicle.

Disconnect any electrical connectors that might interfere with the removal of the reinforcement tube. Detach the wire harness and remove the fasteners securing the tube, then take it out through the door opening.

Cover the steering column with a cloth.

Remove all of the fasteners (bolts, screws, and nuts) holding the instrument panel to the body. Remove the lower front portion of the console by removing two nuts, then slide the console to the rear and out (it is held to the instrument panel by clips at the top). Remove the nut and bolts holding the instrument panel at the left side. At the right side of the instrument panel, remove the nut at the cross-cowl tube, then the bolts. Once all are removed, lift the panel, pull it away from the windshield, and take it out through the driver's door opening. Note: This is a two-person job.

Install the instrument cluster back into the vehicle.Cover the steering column with a cloth to protect the trim covers.Connect any electrical connectors that were disconnected during removal.Push the instrument cluster towards the steering wheel and secure it with the cluster mounting screws.Install the steering column covers and the instrument cluster trim panel.Connect the cable to the negative battery terminal.